remotely from the Internet via a web browser.
1. Enable: Check/uncheck to enable/disable the DMZ host feature.
2. Port: This is the management port to be open to outside access. The default
setting is 8080. Do NOT change it unless instructed by your ISP.
3. IP Address: Here you can specify the IP Address Range for remote
management (When set to 0.0.0.0, the device becomes remotely accessible to
all the PCs on Internet or other external networks).
4. OK: Click to activate your settings.
Note:
1. To access the device via port 8080, enter "http://x.x.x.x:8080" where "x.x.x.x"
represents the the device's Internet IP address and 8080 is the remote admin
port. Assuming the device's Internet IP address is 220.135.211.56, then,
simply replace the "x.x.x.x" with "220.135.211.56" (namely,
http://220.135.211.56:8080).
2. Leaving the IP address field at "0.0.0.0" makes the device remotely accessible
to all the PCs on Internet or other external networks; populating it with a
specific IP address, say, 218.88.93.33, makes the device only remotely
accessible to the PC at the specified IP address.
6.6 Time
This page is used to set the router's system time. You can choose to set the time
manually or get the GMT time from the Internet and the system will
automatically connect to NTP server to synchronize the time.
11N Broadband Wireless Router
.
61