HP 650 Installation Manual page 51

Description and Operation
LEDs and Buttons
Clearing the Passwords: The Clear Button
Using a non-conducting, pointed implement such as a wooden pencil or
a toothpick, press and release the recessed Clear button on the routing
engine. (See figure 2-6 on page 2-9.)
N o t e
Access to the router will no longer be limited by either a manager or
user password. Using the Clear button removes all constraints on access
by anyone using the console, Telnet, TFTP, or network management.
To set new passwords, use the Network Control Language (NCL)
Password command on the console. For more information, refer to
chapter 16 of the Operator's Reference or to "Set manager and user
passwords" in this manual, page 1-28).
2-11