HP 650 Installation Manual page 32

1-28
Installation
Set manager and user passwords.
1. At the Main menu (see figure 1-14), press [2] to select "Network Con-
trol Language Interpreter." The NCL prompt—DEFAULT_CONFIG:
or another system name you have configured—then appears at the
bottom of the screen, as shown in figure 1-18.
NCL Prompt
Figure 1-18. NCL Screen with Default Prompt
2. At the prompt, enter the Password command:
password [Return].
3. Follow the prompts to set the manager password.
4. To set the user password, repeat steps 2 and 3, substituting the user
password for the manager password in step 3.