HP 650 Installation Manual page 82

3-26
Troubleshooting
Replacing a Module
16. To replace the label at the left of the slot that identifies the depart-
ment or site served by the interface card, slide it out from the right.
Position the new label with its shiny side facing the router, and slide
it in from the right. (Additional labels are provided in the router's
accessories kit and also with each interface card.)
Card Self-test
Swap
Swap
Swap
Swap
Figure 3-7. Interface Card Label Location
Fail
Net
1 2
Rx Ins
Fail
Reset Clear
1 2
1 2
Remove and insert label
from this edge
1 2
1