Spinning; Maximum Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele PW 5065 Operating And Installation Instructions

Spinning

Maximum final spin speed

Programme
Cottons
Minimum iron
Delicates
Towelling
Table linen
Bed linen
Curtains
Denim
Dark garments
Woollens
Quick wash
Shirts
Starch
Pillows
Outerwear
Proofing
Separate rinse
Drain / Spin
Intensive wash
Flour
Flour +
Grease and fat
Grease and fat +
Towels
Towels +
Capes
Thermal disinfection15min
Chem. Therm. Dis. 20min
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
20

Rinse and interim spin

There is a spin after the main wash and
rpm
between the rinses. A reduction in the
1400
final spin speed will also reduce the
1000
interim spin speed.
600
1400

To omit the final spin (Rinse hold)

1200
^ Select the Rinse hold setting. The
1200
laundry will not be spun and will
600
remain suspended in the final rinse
1000
water. This reduces creasing if the
1200
laundry is not going to be removed
1200
from the drum immediately after the
1400
end of the programme.
600
– To start the final spin:
1200
The machine will display the
1400
maximum spin speed possible. You
900
can select a spin speed lower than
800
this. Start the final spin by pressing
1400
the Start button.
1400
– To end the programme:
1400
1400
Press the Door button. The water will
1400
drain away. Press the Door button
again to open the door.
1400
1400
To omit the spin between rinses and
1400
the final spin
1400
^ Select the Without spin setting. The
600
laundry is not spun after the final
1400
rinse. The water will drain away and
1400
the machine will go straight into the
anti-crease stage.