Sevylor K5 QuikPak Setup & Operating Instruction page 6

14. Kayak seat.
9. Buckle & tighten the support strap and
set aside.
Inflate Kayak (using order shown below)
. ­
10. Inflate kayak using the following steps.
1Db. Inflate inner chamber to 0.5 PSI.
1Oa.lnflate foot wells to 0.5 PSI.
1Dc. Inflate outer chamber to 0.5 PSI.
11. With male buckles facmg downward. place
cargo net onto kayak in the position as
shown above.
14
1Od.lnflate seat back to 0.5 PSI.
12. Insert each male buckle into the slots
on kayak.
13. The cargo net installed onto kayak.
15. Align hook & loop strip on kayak with the hook & loop strip on the bottom of the seat.
16. Connect the seat back strap buckles to the
buckles on the kayak.
K1 OuikPak™ Kayak
Breakdown/Storage Instructions
/'
1. Remove kayak seat. remove cargo net &
deflate kayak.
2. Unfold kayak seat in reverse order
(QuikPak™ unit should look as
shown above).
15
Pull Strap to
Tighten
17 Adjust seat back straps to your
desired tension.
3. Fold kayak usmg the following steps.
3a. Fold kayak lengthwise to center as
shown above.