Advertisement
Inflate Kayak (using order shown below)
Outer Chamber
-
.
9. Inflate outer chamber to 0.9 PSI.
1O. Inflate DIN chamber to 0.9 PSI.
Seat Bottom
11 Inflate floor chamber to 0.9 PSI.
12 Take seat that was set aside
In
step 8, fold
with velcro downwards as shown.
Seat Hook &
Loop
StriP
13. Line up hook & loop striP on seat bottom with the hook & loop striP on the kayak floor.
Back Rest
Buckles
14. Place seat in kayak with the hook & loop
15. Attach back rest buckles on seat to the
strips secured as shown in step 13.
buckles on the kayak.
6
Spray
16. Adjust backrest straps to desired tension
17 Zip spray skirt onto kayak.
Your QuikPak™ Kayak is now ready for use.
K5 QuikPak™ Kayak
Breakdown/Storage Instructions
J
•
1. Remove kayak seat.
3.
Unfold side flaps, bottom flap & inner
support straps.
2. Remove spray skirt and deflate kayak.
t
4. Pull shoulder straps through the openings.
5b. Fold kayak lengthwise again as shown in
the above image.
7
5. Fold kayak uSing the following steps.
Sa. Fold kayak lengthwise to center as shown
in the above image.
5c. Fold over ends of kayak as shown in the
above image.
Advertisement
