Advertisement
Deflation instructions using the
Sevylor" Dual Action Hand Pump:
Remove adapl",
IIIIS" 110m
1I111alion port and attach
10 deltalll"l pOll 11i!1""iI
';;11111'
sleps as IOllatlDn. This
Will ,1r;IW till'
0111001
ljoll:kly
•
Water temperature and weather does affect the pressure in inflatable
products. In cold weather your product will lose some pressure due
to the fact the air will contract. If this occurs, you may want to add
a little air to improve your products performance. However, in hot
weather, the air will expand. You must let some air out to prevent
your product from failing due to overpressure. You should avoid
exposing your product to extreme temperatures (hot or cold).
DEFLATION INSTRUCTIONS
Deflation instructions using any
Sevylor" OuickPumpTM unit:
IMPORTANT! Inflate the product chambers in the following order:
K5 QuikPak™ Kayak
1. Inflate the floor chamber.
2. Inflate the DIN chamber.
3. Inflate the outside main chamber.
K3 QuikPak™ Kayak
1. Inflate the inner main chamber.
2. Inflate the outer main chamber.
K1 QuikPak™ Kayak
1. Inflate the two foot wells chambers.
2. Inflate the inner main chamber.
3. Inflate the outer main chamber.
4. Inflate seat back.
The chambers on the product will also be numbered to indicate order
of inflation. This order of inflation will ensure the proper volume and
buoyancy of the safety chamber.
Note: To inflate the mini Double Lock™ valve, which is used on
some of the Sevylor® product floors and seat bottoms, follow the
same inflation instructions above or previous instructions, using the
mini Double Lock™ valve adapter. The mini Double Lock
fM
valve
adapter is included with all Sevylor''' pumps. The adapter can be
purchased from Sevylor Customer Service by calling
1-800-835-3278 (Part Number 5010000707).
~
Remove adapter hose trom inflation end and attach to
opposite deflatIOn end of pump. Repeat same steps
as !nflatlon This will draw the air out quickly.
---1
Spray Skirt
2.
Unbuckle waist strap and silOulder straps
UnzIp or remove spray skill.
6.
Fold bottom flap and inner suppcrt straps
lOto the QuikPak™ unit.
Shoulder
Straps
Remove QuikPak™ kayak from box
K5 QuikPak™ Kayak Set Up Instructions
Inner Support
".
Straps
•
3.
Unbuckle inner support straps
5.
Pull shoulder straps through openings
lo
QuikPak'M unit.
7,
Fold over side flaps and secure With the
hook & loop strips
4.
Remove kayak from QuikPak™ unit and
set kayak aside.
8.
Turn seat over and set aside.
4
5
Advertisement
