Advertisement
Shoulder
Straps
5e. Fold kayak in half, with strake up, as
shown in the above image.
7.
Fold over bottom flap and buckle the inner
support strap
& pUll tight.
9.
Buckle shoulder straps.
5c. Fold over kayak end to strake, as shown in
the above image.
Paddle
Hook & Loop
Straps
.
5d. Fold over the other kayak end, as shown in
the above image.
5b. Fold kayak lengthwise again, as shown in
the above image.
6.
Place kayak into QuikPak™ unit, as shown
in above image.
8.
Fold over rear flap and zip closed.
1O. Store pump in cargo net on rear of
QuickPack™
Store paddle in side pockets
and use hook
& loop straps to secure the
top of the paddle shafts.
Your QuikPak
™
kayak is now ready to transport or store.
K1 QuikPak™ Kayak Set Up Instructions
5.
Remove cargo net and set aside.
3.
Turn QuikPak™ unit over and unbuckle the
support strap.
1.
Remove QuikPak™ Kayak from box.
7.
Fold over left side flap of QuikPak™ unit,
as shown above.
NOTE: Left side must be folded over first
so the hook
& loop strips can
be attached.
~
Shoulder~
Straps
...
_ L !
~~:~
-
...>-,.~
.
t>-t,.
r
", .
"
2.
Unbuckle shoulder straps
& waist strap.
4.
Pull the male buckles on cargo net out from
each female buckle.
6. Remove kayak and set aside. Fold shoulder
straps into QuikPak™ unit as
shown above.
8. Fold over right side flap of QuikPak™ unit,
attaching the hook & loop strips to secure
the QuikPak
™
unit side flaps.
12
13
Advertisement
