1.
Do one of the following:
•
If you connect to the Internet using an Ethernet cable: Select ethernet. If you have connected
ūmi to your router or Internet jack using the cable, you're done with network setup.
•
If you connect to the Internet wirelessly: Select wireless. Continue with step 2.
Make sure your router is set to broadcast your network name (SSID). Otherwise, ūmi cannot detect the
network.
2.
Do one of the following:
•
If your network is displayed: Press
select your network.
•
If your network is not displayed: Select
3.
If your network requires a password (network key), use the onscreen keyboard to enter the
password (see
Use the onscreen
Check with the company that provides your network if you do not know the network name or password.
4.
Select
OK
on the network connection confirmation screen.
Enter your activation code
You received this code when you signed up for service at www.umiconnect.com. Go to the website if
you don't have or know your code.
or
on the remote to select your network. Press
join
other. Enter the network name.
keyboard).
to
Enter your activation code
29