2 HOW TO MAKE COPIES
Registering non-standard size in the memory
1
Follow steps 1 to 3 on "Bypass copying on non-standard size
paper" (
2
Press the memory number button (from [MEMORY 1] to [MEMORY
4]) you want to register the dimension.
3
Key in each dimension, and press the [MEMORY] button on the
touch panel.
Key in its length in [Length] and press the [SET] button on the touch panel. Set its
width in the same manner.
Paper size that can be set is as follows:
Length: 100 mm to 297 mm
Width: 148 mm to 432 mm
98
Bypass Copying
P.95).