Toshiba e-Studio2500c Operator's Manual page 132

3 SETTING OF BASIC COPY MODES
Number of punch holes and available paper sizes
Since the number of punch holes and the distance between the holes vary depending on the
country/region, purchase a hole punch unit that meets your requirements. (For details, consult
your service technician.)
MJ-6004E, MJ-6101E
(Japan and most of Europe)
MJ-6004N, MJ-6101N
(North America)
MJ-6004F, MJ-6101F
(France)
MJ-6004S, MJ-6101S
(Sweden)
130 Selecting Finishing Modes
Number of punch holes
and hole diameter
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm dia.)
4 holes
(6.5 mm dia.; 70 mm dia. and
21mm pitch)
Available paper sizes
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT, LT-R, COMP
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
A3, A4, LD, LT
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT-R, COMP