Hazard Switch - KYMCO MXU500i-IRS-EFI Owner's Manual

(1) Hazard switch

Hazard switch
When the hazard switch is pressed, the right and
left turn signal lights flash together.
instrument turn signal indicator light will also
flash when the switch is operated.
When the hazard switch is pressed again, the
right and left turn signal lights go out together.
CAUTION:
．
Turn on this switch when parking or there is
(1)
a special condition.
．
After the hazard switch is turned on, it will
not reset automatically. Be sure to reset it
after use to avoid affecting the traffic safety.
．
When the signal lights are flashing , the
hazard switch does not work.
．When the ignition switch is "OFF" , the
hazard light will still work.
29
The