KYMCO MXU500i-IRS-EFI Owner's Manual page 121

I. Install right side cover.
J. Reinstall the drain plug/washer and tighten
the drain plug to the specified torque.
Tightening torque:
Drain plug (engine):
25 N-m (2.5 kgf-m, 18 lbf-ft)
K. Add the specified amount of recommended
engine oil, and then install the engine oil
filler cap and tighten it.
Recommended oil: see
Oil quantity: see page 146.
CAUTION:
Be sure no foreign material enters the
crankcase.
page 146 .
L. Start the engine and warm it up for several
minutes. While warming up, check for oil
leakage. If oil leakage is found, turn the
engine off immediately and check for the
cause.
M. Turn the engine off, and then check the oil
level through the inspection window (7)
and correct it if necessary.
H
L
(7) Engine oil inspection window
112
(7)