Headlight Beam Adjustment; Drive Shaft Boots - KYMCO MXU500i-IRS-EFI Owner's Manual

HEADLIGHT BEAM ADJUSTMENT

CAUTION:
It is advisable to have a KYMCO dealer make
this adjustment.
To adjust:
Turn the ignition switch at "
the engine.
Turn on the dimmer switch.
Adjust the headlight aim by turning the headlight aim
adjusting screws.
(1) Adjusting screws
" position and start
(1)

DRIVE SHAFT BOOTS

Check the protective boots for holes or tears.
If any damage is found, have them replaced by a
KYMCO dealer
(1) Drive shaft boots
137
(1)