Vicon Kollector Elite Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Vicon Manuals
  4. Network Hardware
  5. Kollector Elite
  6. Installation and operation manual

Vicon Kollector Elite Installation And Operation Manual

Vicon hybrid network digital video recorder
Hide thumbs Also See for Kollector Elite:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operation & Installation Manual, Installation Manual
XX112-04-01
Hybrid Network Digital Video Recorder
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your
requirements or that the operation will be entirely error free or perform precisely as described in the
documentation. This system has not been designed to be used in life-critical situations and must not be
used for this purpose.
Copyright © 2006 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
ViconNet and its logo are trademarks of Vicon Industries Inc.
Kollector Elite, Kollector Pro, Kollector Network Server, VN-306T the Workstation and their logos are trademarks of Vicon Industries Inc.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
Windows is a trademark of Microsoft Corp.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: 44/(0) 1489-566300 WEB: www.vicon-cctv.com
Vicon Part No. 8009-8112-04-01 Section 1 Rev 307

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kollector Elite and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vicon Kollector Elite

Summary of Contents for Vicon Kollector Elite

  • Page 1 ViconNet and its logo are trademarks of Vicon Industries Inc. Kollector Elite, Kollector Pro, Kollector Network Server, VN-306T the Workstation and their logos are trademarks of Vicon Industries Inc. Vicon and its logo are registered trademarks of Vicon Industries Inc.
  • Page 2 • XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 3: Important Safeguards

    Do not force a plug into a For 230 VAC units with a plug, the outlet must be installed non-grounded outlet. near the unit and be easily accessible. Important Safeguards • iii XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...
  • Page 4 Warning: Power must be removed from this unit before removing circuit modules or ribbon cables. Caution: This unit contains circuit cards with integrated circuit devices that can be damaged by static discharge. Take all necessary precautions to prevent static discharge. iv • FCC Notice XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 5: Important Notice

    This manual is delivered subject to the following conditions and restrictions: • This manual contains proprietary information belonging to Vicon. Such information is supplied solely for the purpose of assisting explicitly and properly authorized users of the ViconNet system. •...

  • Page 6: About This Manual

    • Chapter 4, Operation, describes how to power on, boot and power off the Kollector Elite. • Chapter 5, Troubleshooting, provides information on what to do in the unlikely event of a Kollector Elite malfunction. • Chapter 6, Maintenance, provides information on maintaining the Kollector Elite.

  • Page 7: Table Of Contents

    Desktop ...........................9 Rack ..........................9 Installing the Kollector Elite ..................10 Step 1: Connecting the Hardware .................10 Step 2: Connecting External Hardware to the Kollector Elite ........11 Step 3: Connecting Looping Cables ................14 Step 4: Connecting the Power Supply................15 CHAPTER 4 OPERATION....................16 About This Chapter ......................16...
  • Page 8 CHAPTER 8 COAXIAL CABLE RECOMMENDATIONS ...........21 Materials..........................21 Cable Types ........................21 CHAPTER 9 TWISTED-PAIR CABLE RECOMMENDATIONS .........23 Materials..........................23 Cable Types ........................23 CHAPTER 10 TECHNICAL INFORMATION ..............24 viii • Table of Contents XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...
  • Page 9 Table 8-2: Picture Quality vs. Cable Length ..................... 22 Table 9-1: Recommended Individually Shielded, Twisted-Pair Cable Types ........... 23 Table 10-1: Technical Information ........................24 List of Figures • ix XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...
  • Page 10 • List of Tables XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 11: Chapter 1 Introduction

    Vicon ViconNet software application. For software information, refer to the Kollector Elite Software manual, XX112-3X (where X is a revision number between 0 and 9). Kollector Elite can be networked with all models of Kollector Pro, Kollector Network Server and ViconNet Workstations to create a complete system.

  • Page 12: How To Use This Manual

    Complete the remainder of this chapter and then proceed to Chapter 3, Installation. When complete, proceed to Chapter 4, Operation to power-on and boot the system. For software information, refer to the Kollector Elite Software Manual, XX112-3X (where X is a revision number between 0 and 9).

  • Page 13: Unpacking And Inspection

    Unpacking and Inspection All Vicon equipment is tested and inspected before leaving the factory. It is the carrier’s responsibility to provide suitable delivery. Inspect the cartons upon delivery and, if damage is present, make detailed notes on the carrier’s bill. Then, obtain the carrier agent’s signature and file a damage claim as soon as possible.

  • Page 14: Chapter 2 Quick Installation

    Chapter 2 Quick Installation Figure 2-1: Kollector Elite Quick Installation 4 • Quick Installation XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 15: Chapter 3 Installation

    Installation For novice or first-time installers, these steps provide the most thorough and accurate instructions. About This Chapter This chapter details the complete installation of the Kollector Elite Digital Video Recorder. The following sections provide information as follows: • Unpacking the Recorder defines how to remove the unit and accessories from the box.

  • Page 16: Unit Components

    Unit Components This section describes the Kollector Elite unit's front and rear panels. Front Panel Controls and Connections The following picture shows the Kollector Elite front panel. Each panel component is described in the table below. Figure 3-1: Front Panel Layout The Kollector Elite’s front panel contains the following components:...

  • Page 17: Rear Panel Controls And Connections

    Rear Panel Controls and Connections The following picture shows the Kollector Elite rear panel. Each panel component is described below. Figure 3-2: Rear Panel Layout The Kollector Elite's rear panel contains the following components: • Video Looping Outputs: DB-15 connectors used with provided cables to loop the video inputs out.
  • Page 18 Auxiliary Fan: Used to cool the unit during operation (available on 240 FPS models only). • Relays: 8 x 60 V, 1.0 A. Used to control optional equipment connected to the Kollector Elite. • Sensors: Used to connect sensors to the Kollector Elite. For more details, refer to the section Sensor Input, on page 12) •...

  • Page 19: Mounting

    Desktop The desk or table must provide a surface of suitable strength for the Kollector Elite’s weight of 45 lb (20.5 kg). In addition, there must be area left around the cabinet to provide suitable airflow for cooling. Do not place heavy items on the cover.

  • Page 20: Installing The Kollector Elite

    Installing the Kollector Elite After the recorder is mounted permanently, follow the steps in this section to install the Kollector Elite unit hardware. • Step 1: Connecting the Hardware, below • Step 2: Connecting External Hardware to the Kollector Elite, page 11 •...

  • Page 21: Step 2: Connecting External Hardware To The Kollector Elite

    TX- or RX+ and RX-), depending on the type of the device. 4. Install the other end of this cable into the COM controlled device to communicate with the Kollector Elite. NOTE: To release a cable from a terminal block connector, push in the relevant orange DIP switch using a flat-headed screwdriver and pull out the cable.

  • Page 22: Figure 3-5: Sensor Input

    Sensor Input The procedure for connecting a sensor to the Kollector Elite is described below. To connect a sensor to the Kollector Elite: 1. Using a twisted pair cable as defined in Chapter 9, Twisted-Pair Cable Recommendations, prepare a 2-conductor type cable by stripping the ends back for use.

  • Page 23: Figure 3-7: Relay Output

    2-conductor type cable. 2. Connect the cable wires (signal and ground) to the required channel of the terminal block connector (while it is disconnected from the Kollector Elite). Use a small tipped screwdriver to push open each wire connection.

  • Page 24: Step 3: Connecting Looping Cables

    Step 3: Connecting Looping Cables Looping cables are required only when you wish to retrieve video (output) from the Kollector Elite. The purpose of the cables is to transmit video signals to a second transmitter. Each cable transmits 8 video signals - Looping 1 transmits signals from cameras 1 to 8 and Looping 2 from cameras 9 to 16.

  • Page 25: Step 4: Connecting The Power Supply

    Step 4: Connecting the Power Supply To ensure that the Kollector Elite is protected during a power failure and that no important data is lost, it must be connected to an uninterruptible power source (UPS) before use. To connect the UPS: 1.

  • Page 26: Chapter 4 Operation

    Operation About This Chapter This chapter details power on, booting and power off of the Kollector Elite Digital Video Recorder. For full programming and operation information, refer to the Kollector Elite Software manual, XX112-3X (where X is a revision number between 0 and 9). The following sections provide information as follows: •...

  • Page 27: Chapter 5 Troubleshooting

    • If the recorder boots, but does not display the Main Screen, reboot the unit by toggling the front panel power switch OFF and ON. If the recorder still fails to boot, call Vicon Technical Support. Troubleshooting • 17 XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 28: Chapter 6 Maintenance

    2. Open the filter housing on the left-hand side. 3. Carefully remove the old filter, and then wash it under running water with a mild soap. 4. When the filter is completely dry, return it to its place in the Kollector Elite. 5. Close the filter housing.
  • Page 29 4. Look at the fan in the rear of the Kollector Elite and ensure it is operational. 5. When you have finished, replace the filter, turn the Kollector Elite back on, and then close the front door. CAUTION: Do not open the recorder’s top cover for any reason. Failure to follow this instruction can result in serious injury to the user and void the manufacturer’s warranty.

  • Page 30: Chapter 7 Shipping Instructions

    Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A.

  • Page 31: Chapter 8 Coaxial Cable Recommendations

    Let the required picture quality and cable distance provide a guide in choosing the best cable type. For cables other than the approved Vicon types below, contact the manufacturers listed below. Note that “BC” refers to bare copper and “TC” refers to tinned copper.

  • Page 32: Table 8-2: Picture Quality Vs. Cable Length

    1600 (500) Best picture 400 (120) 530 (160) 820 (250) ** For longer cable runs, use a Vicon Video Amplifier to obtain a suitable picture. 22 • Coaxial Cable Recommendations XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 33: Chapter 9 Twisted-Pair Cable Recommendations

    Polypropylene 8000 (2400) Belden 8162 Datalene 15000 (4600) Belden 9729 Datalene 15000 (4600) Belden 9182 Datalene 25000 (7600) ¹ Datalene is a Registered Trademark of Belden. XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video RecorderTwisted-Pair Cable Recommendations • 23...

  • Page 34: Chapter 10 Technical Information

    Input Voltage 120 - 230 VAC ±10%, 50/60 Hz nominal. NOTE: Vicon requires the use of uninterruptible power supply systems (UPS) to prevent voltage fluctuations that can affect operation and cause damage to the equipment. Failure to comply with this violates the unit warranty.
  • Page 35 Operating Humidity 0 to 95% relative, non-condensing Range Storage -4 to 158° F (-20 to 70° C) Temperature Range Storage Humidity 0 to 95% relative, non-condensing Range Technical Information • 25 XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 36: Figure 10-1: Kollector Elite Dimensions

    Figure 10-1: Kollector Elite Dimensions 26 • Technical Information XX112-04-01 Rev 307 Kollector Elite Hybrid Network Digital Video Recorder...

  • Page 37: Vicon Standard Equipment Warranty

    (bug) free. Software support via telephone, if provided at no cost, may be discontinued at any time without notice at Vicon’s sole discretion. Vicon reserves the right to make changes to its software in any of its products at any time and without notice.
  • Page 38 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288)/ 800-645-9116 Fax: 631-951-CCTV (2288) Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Brussels Office Planet II - Unit E...

This manual is also suitable for:

Kollector elite xg

Table of Contents