Vicon Kollector Elite Quick Manual

To Log In to the ViconNet Application:

1. From power-on, the system will boot and Login window displays the last logged in user.
2. In the User Name field, enter your assigned user name. If you are an administrator entering for the first
time, enter admin. If you are a guest, enter guest.
3. In the Password field, enter your assigned password.
NOTE: If you are a guest, you do not need to enter a password. If you are an administrator entering the
application for the first time, you do not need a password. After logging in as admin, it is recommended to
assign yourself a password.
4. Click

Functions on the Main ViconNet Window:

Current Current Current
Details Details Details
Area Area Area
Site Site
and and
Device Device
Tree Tree
System System
Status Status
Area Area
Control Control Control
Dialog Dialog Dialog
Display Display Display
Area Area Area
Other Other Playback Playback
Controls Controls Controls Controls
Used to display current recorders, workstations and devices in the system.
Device Type
Video or
Audio
Detector
Relay
Used to report an estimate of the recording time remaining until data is overwritten and the total number of
cameras and microphones currently recording in the system.
Used to report the current operational state of the Scheduler.
Single: Enables you to view one camera.
Two-by-two matrix (Quad): Enables you to view four cameras simultaneously.
Hexa (Six): Enables you to view six cameras simultaneously.
Three-by-three matrix: Enables you to view nine cameras simultaneously.
Four-by-four matrix (Sixteen): Enables you to view sixteen cameras simultaneously.
Full Screen: Enables maximizing a single video display location to fit the entire screen.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788 TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300 WEB: www.vicon-cctv.com
Kollector Elite Quick Guide
. The ViconNet Main window is displayed, as shown in the following section.
Toolbar Toolbar
Used to manage preconfigured macros
in the system.
Used to view and generate reports.
Video Video
Used to configure the entire ViconNet
Display Display
Area Area system.
Used to logout of ViconNet and login as
another user.
Used to close ViconNet and shutdown
the recorder.
Display Display
Mode Mode
Controls Controls
Function Function
Controls Controls
Description
Camera (Cam)
Microphone (Mic)
Sensor (Sen)
Relay (Rel) (Connected via a CSR016 relay box – this
option will be functional in future versions.)

Functions on the Navigator Window:

"From" "From" Selected Selected Selected
Time/Date Time/Date Recorded Recorded Recorded
Interval Interval Interval
Control Control
Navigator Navigator
Tree Tree
Zoom Zoom
Controls Controls
Navigator Navigator Navigator
Tree Tree Tree
Controls Controls Controls
Main Main Main
Window Window Window
Display Display Display
Location Location Location
Area Area Area
Playback Start Playback Start Create Create Create Museum Museum Museum Synchronized Synchronized
Time/Date Control Time/Date Control AVI AVI AVI Search Search Search Playback Playback
Tab
Displays all recorded segments for the selected cameras and microphone for the last 24 hours
Displays all recorded segments for the selected cameras and microphone for the last 72 hours
Displays all recorded segments for the selected cameras and microphone for the last 7 days
Displays all recorded segments for the selected cameras and microphones
Used to identify the
current user and
Used to place each selected camera from the Recorded Device Contents area will display in the Main ViconNet Window for
Master Nucleus.
viewing and playback.
NOTE: The current default video display location is indicated by the pink border and can be changed by clicking on a
different location. Only one camera can be placed in each video display location. For example, if display mode Quad is
selected, only four cameras can be selected in the Recorded Device Contents area and, therefore, displayed in the Main
Window Display Location area.
Option
Zooms in on the segment and simultaneously updates the Time Interval Map accordingly.
Zooms out of the selected segment, returning the area to its previous display status.
Used to change the number of video display locations.
Used to search for a specific camera's video based on item location and detected video motion.
Used to return to the Main ViconNet Window and playback the selected video and audio as configured.
Used to playback all selected video segments simultaneously.
Option
Creates a new archive, which includes specifying the archive location, name, and contents.
Enables you to remove an archive and all its contents.
"To" "To" "To"
Time Interval Time Interval Time Interval Time/Date Time/Date Time/Date
Tabs Tabs Tabs
Control Control Control
Toolbar Toolbar
Time Time
Interval Interval
Map Map
Area Area
Recorded Recorded
Device Device
Contents Contents
Area Area
Playback Playback
Used to display the current storage location sources, recorders,
Start Start
Time Time workstations and devices, and defined archives.
Selector Selector
Archive Archive Play Play Play
Controls Controls
Button Button Button
Description
Description
Description
Storage Location Storage Location Storage Location
AVD B (Storage Type) Contents AVD B (Storage Type) Contents
Transmitter Transmitter Transmitter
Recorded Recorded
Devices Devices
Archive (Storage Type) Contents Archive (Storage Type) Contents
Devices with Devices with
Archived Segments Archived Segments