Changing The Bulb - Flame Effect Fire - Adam Flame Effect Use & Care Manual

CHANGING THE BULB
Flame Effect Fires
Please ensure that the electric fire is switched off at the mains and unplugged
before attempting to change the bulb.
2) Unscrew the fret.
1) Remove the magnetized trim.
4) Unscrew the old bulb and replace
3) Unscrew the coal bed.
with a 25W BC bulb (MAX).
5) Replace the coal bed, fret, and magnetized trim.
WARNING! Only replace the bulb with the same rated one (25W BC max.)
Due to their indeterminate life span, light bulbs are excluded from the guarantee.
Customer telephone helpline: 08448 809301
Helpline email address: helpline@adamsurrounds.co.uk
CO9039 V3_151110
- 9 -