Changing The Bulb - Pebble Glow Fire - Adam Flame Effect Use & Care Manual

CHANGING THE BULB
Pebble Glow Fires
Please ensure that the electric fire is switched off at the mains and unplugged
before attempting to change the bulb.
Remove all pebbles before attempting to change the bulb.
1) Remove the magnetized trim. 2) Unscrew the fret.
3). Unscrew the pebble bed
4) Unscrew the old bulb and replace with
panel.
a Pebble Glow : 40W BC bulb (MAX)
5) Replace the pebble bed, pebbles, fret and magnetized trim.
WARNING! Only replace the bulb with the same rated one (40W BC max.)
Due to their indeterminate life span, light bulbs are excluded from the guarantee.
Customer telephone helpline: 08448 809301
Helpline email address: helpline@adamsurrounds.co.uk
CO9039 V3_151110
- 8 -