Electrical Specification; Maintenance - Adam Flame Effect Use & Care Manual

ELECTRICAL SPECIFICATIONS
Important Electrical Safety
The fire must not be located under an electrical socket; the socket must always be
accessible in order to disconnect the heater from the electrical supply for
maintenance and cleaning. Never cut off the plug and hard wire into a fixed fused
spur.
Important!
Do not spray liquids directly onto any surface of the unit.
•
This fire must be earthed. The mains supply must be safely routed from the
•
fire to an electrical socket.
If the supply cord is damaged, it must be replaced by the manufacturer or its
•
service agent or a similarly qualified person in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with
•
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have had supervision or instruction concerning use of
the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
•
appliance.
The plug must be accessible after installation to allow for isolation in an
•
emergency.
Warning: In order to avoid overheating, DO NOT COVER THE HEATER
Note : An y new wiring required, must be In accordance with local and national codes
and other applicable regulations in order to reduce the risk of fire, electric
shock, or other injuries.
Note : When the fire is turned on for the first time or when it has not been used for
some time, it may release a slight, harmless odour. This odour is a normal
occurrence caused by the initial heating of the internal heating elements and
will disappear with use

MAINTENANCE

• Brushed stainless steel (silver) fires can be cleaned using a cloth and
proprietary cleaner. Other features (non-silver) can be cleaned using a damp
cloth.
• If the cable is damaged, it must be replaced by a suitably qualified person.
• The area around the fire should be kept free from animal hair, lint and other
extraneous material that may be drawn into the workings of the appliance
which could affect its performance.
Helpline email address: helpline@adamsurrounds.co.uk
CO9039
Customer telephone helpline: 08448 809301
- 4 -
V3_151110