Operating The Fire; Maintenance - Adam CO9043 Use & Care Manual

OPERATING THE FIRE

The appliance is controlled using 4 switches, located on the top left side of the fire.
Use the following sequence to operate. The
Controls located at the top left side of the
fire

MAINTENANCE

There are no specific requirements for the care of this unit, other than general
cleaning.
• Other features (non-silver) can be cleaned using a damp cloth, and buff up
dry with a soft cloth.
• If the cable is damaged it must be replaced by a suitably qualified person.
• The area around the fire should be kept free from animal hair, lint and other
extraneous material that may be drawn into workings of the appliance and
could affect its performance.
CO9043
Customer telephone helpline: 08448 809301
Helpline email address: helpline@adamsurrounds.co.uk
represents a 'pressed switch.'
grey
On/Off with Effect
only
1kW Heat setting
- 7 -
Cool Air Blow &
Effect
2kW Heat Setting
V3_151110