Plug Replacement; Appliance Data - Adam Flame Effect Use & Care Manual

PLUG REPLACEMENT

• This appliance is supplied with a BS1363 3 pin plug fitted with a 13 Amp fuse.
Should the fuse require replacement, it must be replaced with a fuse rated at 13
Amp and approved to BS1362.
• In the event the mains plug has to be removed/replaced for any reason, please
note:
The wires in the mains lead on this appliance are coloured in accordance with the
following code:
Green and Yellow
Blue
Brown
THIS APPLIANCE MUST BE EARTHED
As the colours may not correspond with the markings identifying the terminals in your
plug proceed as follows.
• The green and yellow earth wire must be connected to the terminal in the plug
which is marked with the letter E or with the earth symbol
• The blue wire must be connected to the terminal marked N
• The brown wire must be connected to the terminal marked L
Important - any cut off plug should be disposed of safely to prevent hazard. There is
a danger of electric shock if a cut off plug is inserted into a socket outlet.

APPLIANCE DATA

Flame Effect
Supply Voltage: AC 220-240V, 50Hz
Rated Power: 2000W
Fuse Rating: 13 Amp
Lighting: 1 x 25W BC Bulb (MAX)
Helpline email address: helpline@adamsurrounds.co.uk
CO9039
- Earth
- Neutral
- Live
Customer telephone helpline: 08448 809301
- 11 -
Pebble Glow
Supply Voltage: AC 220-240V, 50Hz
Rated Power: 2000W
Fuse Rating: 13 Amp
Lighting: 1 x 40W BC Bulb (MAX)
V3_151110