Advertisement
1.
Resetting the safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions
are the cause.
2.
All problems due to operation at voltages other than specified on equipment nameplates conversion to correct voltage
must be the customer's responsibility.
3.
All problems due to electrical connections not made in accordance with electrical code requirements and wiring
diagrams supplied with the equipment.
4.
Calibration of heat controls after the first sixty (60) days on original components. Replacement of items subject to normal
wear to include such items as knobs, light bulbs, baskets, grids, mechanical timers and thermocouples. Normal
maintenance functions including lubrication, adjustments of airflow, thermostats, door mechanisms, microswitches, burners
and pilot burners and replacement of fuses and indicating lights are not covered by warranty.
5.
All frypots welded in the field.
6.
Deterioration of aluminum vessels due to insertion of food product or use of abrasive cleaners is not covered by warranty.
7.
Full use, care, and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are
customer responsibility. Proper attention will prolong the life of the machine.
8.
Travel mileage is limited to sixty (60) miles from an Authorized Service Agency or one of its sub-service agencies.
9.
All labor shall be performed during regular working hours. Overtime premium
will be charged to the buyer.
10. All genuine Wells replacement parts are warranted for ninety (90) days from date of purchase on non-warranty equipment.
This parts warranty is limited only to replacements of the defective part. Any use of non-genuine Wells parts completely
voids any warranty.
11. Installation, labor, and job check-outs are not considered warranty.
page 9
WELLS MANUFACTURING COMPANY SERVICE POLICY AND
PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS
Hide quick links:
Advertisement
