Digital Zoom Mode; Recording Video; Figure 78 - Ptz Speed Controller - ADT A-SDR400LTE-80 User Manual

User's Manual
Set Speed
Select Set Speed in the PTZ Menu and change the number from 1 to 16 using the Left and Right
arrow buttons. Once you have set the speed you want, press the button. If the camera does not
support the speed control, Set Speed menu cannot be selected.
Figure 78 — PTZ speed controller.

Digital Zoom Mode

You can enter the Digital Zoom mode by pressing the button in the PTZ mode. When a PTZ
PTZ
device is not installed, pressing the button in the live monitoring mode enters the Digital Zoom
PTZ
Mode directly.
NOTE: You cannot enter the Digital Zoom mode when the selected camera is Off, has lost or
is set to Covert.
Once you are in the Digital Zoom mode, a bright small box is laid over the image. The box
indicates the area to be enlarged. Move the position of that box using the arrow buttons, and press
the button to enlarge that area. A displays on the enlarged screen. Pressing the button
PTZ
again returns the DVR to the Live Monitoring mode.

Recording Video

Once you have installed the DVR following the instructions in Chapter 2 — Installation, it is ready
to record. Unless you change the setup, the DVR is recording video and will continue recording
until the hard disk drive is full. The factory default is Stop when the hard disk drive is full. The
DVR can be set to continue recording (Overwrite) once the hard disk drive is full. It does this by
recording over the oldest video.
Although you will be able to record without changing the unit from its original factory settings, you
will want to take advantages of the DVR's many tools. See Chapter 3 — Configuration for detailed
descriptions of the recording mode options.
NOTE: When the DVR is recording video, the REC LED on the front panel is lit and a red dot
appears on the monitor.
Although you have set time-lapse or event recording, pressing the button activates panic
PANIC
recording, so the DVR will record video regardless of the time-lapse or event recording schedule.
Press the button again to release the panic recording.
NOTE: When the DVR is in the panic recording mode, a white appears in the red dot which
indicates the DVR is recording, and the REC LED on the front panel flickers.
62