Figure 38 - Text-In (E-Pos) Setup Screen - ADT A-SDR400LTE-80 User Manual

User's Manual
Highlight the box beside Transaction Timeout, and set the length of time to wait for the new text
string. The DVR will consider a transaction ends if there is no text sting during timeout dwell after
the last text input string. You can adjust the timeout dwell from 0 to 300 seconds.
Highlight the box beside Display Dwell, and set the length of time you would like to display text-in
data. You can adjust the display dwell time from 1 to 300 seconds.
Highlight the Case Sensitive box and press the button to toggle between On and Off. Refer to
the device manufacturer's documentation to determine if the text strings are Case Sensitive. If the
device distinguishes between upper and lower case letters, make certain the Case Sensitive box is
turned On.
NOTE: The following description is for an E-POS device.
Figure 38 — Text-In (E-POS) Setup screen.
Highlight the box beside Register Number and press the button. Change the number by
highlighting it and using the Up and Down arrow buttons to increase or decrease the number. The
Register Number is used to identify any specific text input when the E-POS device has multi text
inputs.
Highlight the box beside C/J Prefix and press the button to toggle between C (Customer data)
and J (Journal data).
NOTE: The settings from Transaction Start to Case Sensitive are identical to Generic Text
settings.
28