Audio Setup Screen; Figure 41 - Audio Setup Screen - ADT A-SDR400LTE-80 User Manual

User's Manual
When set to On, the Alarm Out is active during the scheduled time. When set to Event, the Alarm
Out is only active when there is an Event during the scheduled time.

Audio Setup Screen

Highlight Audio in the Main menu and press the button. The Audio Setup screen appears.
Figure 41 — Audio Setup screen.
Highlight the box beside Audio Recording and press the button. This toggles between On and
Off. When it is On, the DVR also records audio when it is recording video.
Highlight the box beside Mute and press the button. This toggles between On and Off. When it
is On, the DVR will NOT play live or recorded audio.
Highlight the box beside Audio In and press the button. A list of cameras appears, and you can
select which camera you want associated with the audio input.
NOTE: The DVR will play live audio through the attached speaker only when the associated
camera is displayed in full-screen on the monitor.
You can save your changes by highlighting OK and pressing the button . Selecting Cancel exits
the screen without saving the changes.
NOTE: The DVR will NOT record audio when the recording speed is set to less 15 ips (12.5 ips
for PAL). The DVR may not record audio depending on the Transfer Speed when the RAS
(Remote Administration System) Watch application program is connected.
30