Settings Required After Connection; F65 Functions And Displays; Functions That Can Be Performed From The F65 - Sony SKC-4065 Operation Manual

4
Attach the connector cap to the
CAMERA connector of the unit.
Settings Required after
Connection
Device Required settings
F65 None (automatic
detection)
BPU4000 Select F65 in the menu
(Configuration/CHU
MODE/CURRENT).
CA4000 Select F65 in the menu
(Maintenance/CHU
MODE/CURRENT).
a) If the following settings are specified when the
devices in the system are first connected, the
operating modes of each device must be
matched after the unit is mounted.
• The F65 is set to HD mode or HFR mode.
• The system format of the CA4000/
BPU4000 is set to a double-speed mode
(2x).
To match the operating modes, follow the
"Power Off/On F65" instructions that appear
on the F65's subdisplay and restart the F65.
Depending on the original configurations, you
may need to restart up to two times.
For details on BPU4000 and CA4000 menus, refer to
the Operation Manuals for software version 2.0 of
each device.
26

F65 Functions and Displays

a)
F65 Functions
and Displays
The CBK-65EL Upgrade Kit must be
installed on the F65 to operate the F65 with
the unit mounted.
After mounting, the F65 operates as a
sensor module and main line settings, such
as SYSTEM FORMAT, and network
connections will not be possible.
In such cases, VF outputs and SDI outputs
from the F65 cannot output system output
images or return output images.
However, assistance functions, such as look
and zoom, function identically to when the
F65 stands alone, and are output
independently without affecting the main
line system.
For details on VF outputs and SDI outputs, refer to
the Operation Manual for the F65.
Functions that Can be
Performed from the F65
• Changing the ND filter
• Changing the FAN mode
• Switching between the mechanical
shutter and electronic shutter
• VF/SDI output settings
• Assignable switch function
• APR, Manual RPN
For details on operations, refer to the Operation
Manual for the F65.