JK Audio INLINE PATCH User Manual page 4

Operating (continued)
Setup for use with PBX phone systems:
Setup for use with PBX phone systems is the same as analog
telephones with one exception. Instead of connecting the
phone line jack of the Inline Patch to a wall jack, you will
connect to the data / modem jack of your PBX phone. You will
still need a regular analog telephone connected to the phone
jack of the inline patch. When dialing out you will need to take
the necessary steps to get a direct connection to the main
analog phone line (example: dialing 9 + 9 + phone number).
You will not physically use your PBX phone while operating the
Inline Patch. It simply acts as your connection to the telephone
line. Dialing, speaking, etc. will be done through the separate
analog telephone.
To digital or
PBX Wall Jack
Analog Telephone
Digital or PBX
Inline Patch
Telephone
To Data /
Modem
Port
Audio Equipment
To send audio into
Powered Speakers or audio
phone line
equipment to receive audio
from phone line
4