JK Audio INLINE PATCH User Manual page 3

Operating
Setup for use with residential / analog telephones:
1. Unplug the telephone cord from the base of your
telephone.
2. Plug that telephone cord into the jack on the Inline Patch
marked "Phone Line".
3. Using the telephone cable we have provided, plug one
end into your Inline Patch marked 'Phone" and the other
end of the cable into your telephone.
4. Connect your audio equipment to the 3.5mm and / or XLR
line input and output jacks on the Inline Patch.
5. Connect the power supply to the back of the Inline
Patch.
Analog Telephone
Audio Equipment
To send audio into
phone line
Inline Patch
Powered Speakers or audio
equipment to receive audio
from phone line
3
To analog RJ11
Wall Jack