Routine Maintenance - Horizon Fitness Achiever 607 Owner's Manual

R O U T I N E M A I N T E N A N C E
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our Elliptical Trainer so lubrication is not needed.
The most important maintenance step is to simply wipe your perspiration off the train-
er after each use.
HOW DO I CLEAN MY HORIZON FITNESS ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your Horizon Fitness elliptical trainer and its operating environment will
keep maintenance problems and service calls to a minimum. For this reason, Horizon
Fitness recommends that the following preventative maintenance schedule be fol-
lowed.
AFTER EACH USE (DAILY)
Turn off the elliptical trainer with the on/off switch, and unplug the power cord from
the wall outlet.
WARNING!
To remove power from the elliptical, the power cord must be disconnected from the
wall outlet.
• Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they can
cause damage to the elliptical.
• Inspect the power cord. If the power cord is damaged contact Horizon Fitness.
• Make sure the power cord is not underneath the elliptical trainer or in any other area
where it can become pinched or cut.
EVERY WEEK
Clean underneath the elliptical, following these steps:
• Turn off the elliptical trainer with the on/off switch.
• Then unplug the power cord at the wall outlet.
• Move the elliptical trainer to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated
underneath the elliptical.
• Return the elliptical trainer to its previous position.
26