Page 1 01013 Vitoria (Alava)-APDO 133, Spain Phone 1-800-ALPINE-1 (1-800-257-4631) Phone 945-283588 ALPINE ELECTRONICS FRANCE S.A.R.L. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. (RCS PONTOISE B 338 101 280) 161-165 Princes Highway, Hallam 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, Victoria 3803, Australia B.P.
Page 2: Table Of Contents
Contents Presetting Stations Automatically ....18 Tuning to Preset Stations ........ 18 Operating Instructions CD/MP3/WMA/AAC Playback ............19 Repeat Play ............. 19 PRECAUTIONS M.I.X. (Random Play) ........19 Selecting Folders IMPORTANT INFORMATION, PLEASE (Concerning MP3/WMA/AAC) ....19 READ CAREFULLY BEFORE USING THIS PRODUCT.
Page 3 Adjusting Colour of Picture ......30 (AUX Setup) ..........41 Adjusting Image Contrast ......30 Setting the AUX3 ........42 About INE-W940E ......... 31 Setting the AUX3 Sel. (Switching the Visual Input Signal System) ........ 42 Displaying the Product Information .... 31 ®...
Page 4 BLUETOOTH Operation Operating the Mobile Digital TV Receiver (DVB-T) ............55 Setup Before Using ......... 47 Changing to the Mobile Digital TV Receiver About BLUETOOTH ........47 (DVB-T) Mode ........55 About the Hands-Free Phone ...... 47 About the DVB-T Operation Screen ... 55 Before Using BLUETOOTH .......
Page 5 END USER LICENSE AGREEMENT (NAVTEQ) ..........76 Installation and Connections Warning ..........78 Caution ........... 78 Precautions ..........78 Installation ............79 Connections ............ 82 System Example ..........84 NAVIGATION SECTION...
Page 6: Operating Instructions
• This software is designed for use exclusively in the In these cases, use your own personal judgement. INE-W940E. It cannot and may not be used in conjunction • The map database is designed to provide you with route with other hardware.
Page 7: Caution
Failure to do so may cause personal injury or damage to the in a safe location before performing these functions. Failure to do product. Return it to your authorized Alpine dealer or the nearest so may result in an accident.
Page 8: Notice
Installation Location Damaged Disc Make sure the INE-W940E will not be installed in a location Do not attempt to play cracked, warped, or damaged discs. Playing subjected to: a bad disc could severely damage the playback mechanism.
Page 9: Discs Playable On This Unit
This will restrict operation of these functions to times when the vehicle is parked. This ensures the focus of the driver’s attention will be on the road and not on the INE-W940E. This has been done for the safety of the driver and passengers.
Page 10 Discs that cannot be played Tips for making your own discs ® DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/ The INE-W940E plays DVD Video, DivX , Video CD, Audio CD AAC files), photo CDs, etc. and has a built in MP3/WMA/AAC decoder.
Page 11 • This unit is compatible with discs recorded in the standard DVD-Video format. Alpine accepts no responsibility for lost data, etc., even if data, etc., • Note that discs not finalised (processed to enable to play on is lost while using this product.
Page 12 • The BLUETOOTH word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under licence. • “MPEG Layer-3 audio coding technology licenced from Fraunhofer IIS and Thomson.”...
Page 13: Getting Started
(Eject) button • The unit can be turned on by pressing any button. • The INE-W940E is a precision device. Careful handling of the unit Ejects a disc. should provide you with years of trouble-free operation.
Page 14: Turning The System On
Turning the System On Adjusting the Volume With the Alpine system, when the ignition key is turned to ACC or ON, Adjust the volume by pressing Volume decreases/increases continuously by pressing and the opening screen will be automatically displayed. holding...
Page 15: Switching Sources
Switching Sources About Sound Menu button During audio/visual playback, press the (AUDIO) button or touch a Touch [Sound Menu] icon on the screen to change the screen to the source button in the top banner to switch to the desired source. Sound Menu screen.
Page 16: Switching The Dual Screen Display
Switching the Dual Screen Display Dual Screen Display Position When you touch on the dual screen during video playback, the You can switch the right and left screen positions using drag & drop screen size selection message is displayed. around the centre of the navigation screen. The screens will switch positions when you remove your finger.
Page 17: Touch Operation
Touch Operation About the Indicator Display You can operate the system by using the touch panel on the screen. The Indicator Bar at the bottom of the screen displays various types of information, like the current time. • Be sure to touch the onscreen button lightly with the pad of your finger to protect the display.
Page 18: Radio
Presetting Stations Manually Radio Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek Display example for Radio main screen tuning. Touch and hold any one of the preset buttons for at least 2 seconds.
Page 19: Cd/Mp3/Wma/Aac
] again or touch [ ] in the middle of the screen to start playback. • The INE-W940E can play back MP3/WMA/AAC files saved to CD or DVD. Use a format compliant with this unit. For further information about playing or storing MP3/WMA/AAC files, refer to pages 20 and 21 before using the unit.
Page 20: Searching From Cd Text
Searching from CD Text About MP3/WMA/AAC Touch [ (Search)] of Bottom banner during CAUTION playback. Except for private use, duplicating audio data (including MP3/ The CD text search screen is displayed. WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright Touch the selected track name.
Page 21 Supported playback sampling rates and bit rates Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be Sampling rates: 8 kHz - 48 kHz (Disc/USB) what’s expected.
Page 22: Dvd/Video Cd
[Return] DVD/Video CD Returns to the previous screen. Disc types that can be used for each heading are represented by the following marks. Display example for DVD Video main screen DVD Commercial Video discs (used for the distribution of movies, etc.) or a DVD-R/DVD- RW, DVD+R/DVD+RW recorded in a video mode can be used.
Page 23: Playing A Disc
The menu operation mode will be displayed. stopped and the emergency brake is applied. If the INE-W940E is not installed correctly, the driver will be able to watch the DVD/TV/Video while driving the vehicle and may be distracted from looking ahead causing an accident.
Page 24: Numeric Keypad Input Operations
Numeric Keypad Input Operations Stopping Playback (PRE STOP) Touch [10KEY] of Bottom banner. Touch the stop button during playback to stop playback. That position is The numeric keypad input mode screen appears stored in the memory. If [10KEY] is not displayed, touch [<<] in the bottom banner to display [10KEY].
Page 25: Finding The Beginnings Of Chapters/Tracks/Files
Finding the Beginnings of Chapters/ Repeat Playback Tracks/Files Use this function to play the disc’s titles, chapters or tracks, etc., repeatedly. During playback, touch [ ] or [ Touch [ ] of Bottom banner. The chapter/track/file switches each time the button is touched, The repeat mode switches every time the button is touched.
Page 26: Searching Directly By Chapter Number/Track
• This function cannot be used on discs on which no title numbers are Switching the Angle recorded. • Some disc may not accept any operation. On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback. Searching Directly by Chapter Number/ Touch [ANGLE] of Bottom banner.
Page 27: About Divx
® About DivX ® DivX is a codec (software) to compress moving images while maintaining image quality using a highly advanced compression ratio and operating speed. ® • Official DivX Certified product ® ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
Page 28: Setup
Setting items: Language / Clock Display / Security Code / Setup Top/Bottom Banner Fade Out / Screen/LED Customize / Visual / About / Installation • Depending on the item, repeat step 3. Setup Operation Touch [ ] or [ ] etc., to change its setting. •...
Page 29: Clock Display Setting
Clock Display Setting Setting Top banner and Bottom banner Display [Clock Display] is selected on the General setup menu in step 3. Refer to “General Setup Operation” (page 28). [Top/Bottom Banner Fade Out] is selected on the General setup menu The clock indication on the monitor display is turned on or off in step 3.
Page 30: Adjusting The Touch Panel
Adjusting the Touch Panel Switching Display Modes Adjustment becomes necessary when the display position on the LCD Setting item: Display Mode Setting contents: WIDE (Initial setting) / CINEMA / NORMAL and the touch position on the touch panel do not match. Setting item: Screen Alignment Touch [Screen Alignment] in the Screen/LED Customize screen.
Page 31: About Ine-W940E
Displaying the Product Information The Installation check screen is displayed. You can view the version information of this product. Make note of this information and refer to it whenever you contact Alpine Tech Support or an Alpine-authorised dealer. Setting item: Version Info Contents: Serial No.
Page 32: Sound Setup
Sound Setup Car Specific Sound Setup [Car Specific Sound Setup] is selected in the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 32). Sound Setup Operation You can set and reproduce the best audio environment for the environment in your car.
Page 33: Setting The Mx (Media Xpander)
MX AUX/AUX3 Setting the MX (Media Xpander) Choose the MX mode (Compress Media, Movie, or Music) that corresponds to the media connected. [Media Xpander] is selected on the Sound setup menu in step 3. Refer • To cancel MX mode for all music source, set MX to “Off” in step 1. •...
Page 34: Lowering Subwoofer Level Temporarily
Lowering Subwoofer Level Temporarily Adjusting the Crossover Settings (X- OVER) Touch [Sub W. LEVEL 0] to lower the Subwoofer level to Level 0. [X-OVER] is selected on the Sound setup menu in step 3. Refer to • To return to the previous Subwoofer level, touch [Sub W. LEVEL 0] “Sound Setup Operation”...
Page 35: Adjusting The Parametric Equalizer Curve (Parametric Eq)
Calling the X-OVER adjusted value Adjusting the Level Calling the pre-set X-OVER adjusted value. Touch [ ] or [ ] of “Level” to adjust the level of selected band. Touch [Preset1], [Preset2], or [Preset3] on the X- OVER screen. Setting contents: -7 to +7 (Initial setting: 0) The setting stored in the Preset will be recalled.
Page 36: Other Setting
Other Setting About Time Correction [Other] is selected on the Sound setup menu in step 3. Refer to “Sound The distance between the listener and the speakers in a car vary widely due to the complex speaker placement. This difference in the distances Setup Operation”...
Page 37 Time Correction Value List Example 2. Listening Position: All Seats Time Time Distance Distance Distance Distance Difference Difference Adjust the time correction level of each speaker to almost the same level. (cm) (inch) (cm) (inch) (msec) (msec) 173.4 68.3 Sit in the listening position (driver’s seat, etc.) and 176.8 69.7 measure the distance (in meters) between your head...
Page 38: About The Crossover
Adjusting to a frequency range outside that recommended may cause damage to the speakers. Crossover (X-OVER): For the recommended crossover frequencies of Alpine speakers, refer This unit is equipped with an active crossover. The crossover limits the to the respective Owner’s Manual.
Page 39: Source Setup
Source Setup Disc Setting [Disc] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 39). Source Setup Operation • You can perform DVD setup in DVD video mode. • Touch [Stop] before performing Disc setup. The parking brake must be engaged to access the Source mode Changing the Language Setting screen.
Page 40: Setting Of The Subtitle Language
Set the rating level of PARENTAL Setting of the Subtitle Language 4 Touch [Parental]. Set the language of the subtitles displayed on the screen. 5 Touch “ ” on “ ” to turn “On". Select “Off” to cancel parental lock or if you do not want Setting item: SUBT.
Page 41: Setting The Video Cd Play Mode
4:3 PAN-SCAN: AUX Setting Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left [Aux] is selected on the Source setup menu in step 3. Refer to “Source and right sides will not be visible (when playing a 16:9 size Setup Operation”...
Page 42: Setting The Aux3
Setting the AUX3 BLUETOOTH Setup Connection with external input devices is available through the iPod VIDEO connector. An optional adapter cable is required (standard RCA BLUETOOTH Setup Operation to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug). You can also play back video connecting with an optional AV cable (4- pole mini AV plug to 3-RCA).
Page 43: Displaying Bluetooth Information
Deleting a BLUETOOTH Device from the list Displaying BLUETOOTH Information You can delete the information of a previously connected BLUETOOTH compatible device. [BLUETOOTH Info] is selected on the BLUETOOTH setup menu in Touch [Set BLUETOOTH Device]. step 3. Refer to “BLUETOOTH Setup Operation” (page 42). Touch [Delete] of the BLUETOOTH compatible You can display the BLUETOOTH device name and device address of device to delete from the Paired Device list.
Page 44: Setting The Time For Automatic Reception Of A Call
Setting the Time for Automatic Adjusting the Ring Tone Volume Reception of a Call [Ring Tone Volume] is selected on the BLUETOOTH setup menu in step 3. [Auto Answer Time] is selected on the BLUETOOTH setup menu in Refer to “BLUETOOTH Setup Operation” (page 42). step 3.
Page 45: Camera Setup
Camera Setup AUX Camera Setting [Camera] is selected on the Camera setup menu in step 3. Refer to “Camera Setup Operation” (page 45). Camera Setup Operation Setting the Camera Input With an optional camera connected, its video is output to the monitor. When the camera is connected, set this item.
Page 46: Camera Interrupt Setting (Power Off Mode)
Adjusting guides simultaneously Touch [Link]. The 3 vertical guides of the currently-selected guide link together, allowing them to be adjusted simultaneously. Turning guide display ON/OFF Turning the selected guide off. Touch [ON/OFF]. The currently selected guide will turn off. To turn the guide on, touch [ON/OFF] again. •...
Page 47: Bluetooth Operation
Owner’s Manual are based upon Connection the latest available information and are believed to be accurate at the time of printing. Touch [Disconnect]. Alpine reserves the right to change or modify any information or The BLUETOOTH connection is disconnected. specifications without notice or obligation.
Page 48: Changing The Connecting Bluetooth Device
Changing the connecting BLUETOOTH Calling Device Use the Phone menu screen to make a phone call. If multiple BLUETOOTH devices are registered in this device, you can Using Short Cut Dialling to Make a Call change the connection among the registered devices. You can assign up to 4 phone numbers for one-touch dialing to make a Press the (PHONE) button.
Page 49: Entering A Phone Number To Make A Call
Entering a Phone Number to Make a Call Changing the Voice Output The voice output for calls is switchable between car speakers and the Press the (PHONE) button. mobile phone speaker. The phone menu screen is displayed. Touch [ Touch •...
Page 50: Adding The Phone Book
Deleting All Entries from the Phone Book Adding the Phone Book Press the (PHONE) button. Press the (PHONE) button. The Phone menu screen is displayed. The Phone menu screen is displayed. Touch [ Touch [ The Phone Book screen is displayed. Touch [Download].
Page 51: Call Waiting Function
Call Waiting Function BLUETOOTH Audio If a call comes in from another phone during a call, a notice is displayed If a BLUETOOTH compatible mobile phone, portable player, etc. is on the screen. This function can only be used if the connected mobile connected by wireless, you can play back a song (operation is phone has a call waiting function service included.
Page 52: Playback
Playback M.I.X. (Random Play) Available for AVRCP Ver. 1.3 and 1.4 only. Press the (AUDIO) button. Touch [ ] during playback. The M.I.X. mode switches every time [ ] is touched. Touch [BLUETOOTH-AUDIO] of Top banner. Touch [ ] or [ ] to select the desired track (ALL) (file).
Page 53: Auxiliary Device (Optional)
Example for AUX1, AUX2, AUX3, DVD, Game mode display Operating Auxiliary Devices (Optional) To operate devices connected to the AUX terminals of INE-W940E, follow the procedure described below. • Set AUX In to “On.” Refer to “Setting the AUX Mode” (page 41).
Page 54: About The Dvd Operation Screen
Menu operation mode screen display example About the DVD Operation Screen When the external DVD player playback screen is displayed, you can touch the screen to display the operation screen. For details on how to operate, refer to the Owner’s Manual of the connected DVD player. External DVD player display example [Key] The menu operation mode will be displayed.
Page 55: About The Dvd Changer Operation Screen
About the DVD Changer Operation Screen About the DVB-T Operation Screen When the External DVD changer playback screen is displayed, you can When you touch the screen in the DVB-T mode, the operation screen is touch the screen to display the operation screen. For details on how to displayed.
Page 56: About The Tv Operation Screen
About the TV Operation Screen When the TV playback screen is displayed, you can touch the screen to display the operation screen. For details on how to operate, refer to the Owner’s Manual of the connected TV. ], [ Switches the Channel number / Preset channel / frequency down.
Page 57: Camera Operation (Optional)
About the Rear Camera Guide Camera Operation (Optional) Indication mark meaning When the car is put into reverse gear, the monitor switches to the rear view camera image. Guides appear to help visualise the car's width and When an optional camera is connected, the view video of camera can be distance from the rear bumper.
Page 58 Distance guidance mark Error between the screen and the actual road surface In the following conditions, errors are produced between the screen The distance guides represent the ground level distance from the rear guidance and the actual road surface. (The illustrations represent a case bumper.
Page 59 When there is a steep downward slope behind the car (example) <Screen> <Situation of the car> Error Error In the case of a downward slope behind the car, the distance guides are displayed farther from the rear bumper than the actual distance. If there is an obstacle on the downward slope, it seems closer than its actual position.
Page 60: Usb Memory (Optional)
• The order in which songs are played during library creation may USB Memory differ from the order in the USB memory device. (Optional) Playback Press the (AUDIO) button. You can play back music files (MP3/WMA/AAC) and video files ® (DivX ) stored in a USB memory device on the internal player of this Touch [USB] of Top banner.
Page 61: Random Play (M.i.x.)
Random Play (M.I.X.) Searching for a Desired Song Operation differs depending on whether the most recent song search INE-W940E can carry out 2 kinds of searches. was a Tag Search or a Folder Search. File/Folder Name Search Touch [ ] during playback.
Page 62: Direct Up/Down Function
Searching by artist name Select the Desired Folder (Folder up/ Touch [ (Search)] of Bottom banner during down) playback. Touch [Music]. This operation is available only if the most recent song search was a The search mode screen appears. Folder/File Search. If you listen to a file from a selected folder, the folder can be changed.
Page 63: Ipod/Iphone (Optional)
461iV (sold separately). You can connect a video-capable iPod to enjoy video as well as music. When the INE-W940E is connected by the above cable, the controls on the iPod are disabled. • Internet or telephone functions, etc., of the iPhone or iPod touch are not controllable from the unit, but these functions can be controlled using the iPhone or iPod touch itself.
Page 64: Playback
All songs of the selected album are played back. • If a song is playing on the iPod/iPhone when it is connected to the INE-W940E, it will continue playing after the connection. To Search for a Song in the Album of the Artist •...
Page 65: Searching For A Desired Video File
Searching for a Desired Video File Direct Up/Down Function You can select a movie, music video, etc., from the list screen. If you touch [ ] of the album name in the search mode, this album will be played back repeatedly. To go to the previous or next Album, use the •...
Page 66: Random Play (Shuffle)
Random Play (Shuffle) Touch [ ] during playback. The files will be played back in a random sequence. The Shuffle mode switches every time [ ] is touched. Shuffle Songs Shuffle Albums (OFF) Shuffle Songs Shuffle Albums: The songs on each album are played back in proper order.
Page 67: Product Software Update
* These functions differ from disc to disc. For details, refer to the disc’s This product use software that can be updated through a USB memory instructions. device. Download the software from the Alpine website and update the product using the USB memory device. Updating this product Check the Alpine website for details on updating.
Page 68: List Of Language Codes
List of Language Codes (For details, see page 39.) Abbre viation Code Language Abbre viation Code Language Abbreviation Code Langua g e 6565 Af ar 7369 Inter lingue 8278 Kirundi 6566 Abkhazian 7375 Inupiak 8279 Romanian Afr ikaans 7378 Indonesian 8285 Russian 6570...
Page 69: List Of Country Codes
List of Country Codes (For details, see page 40.) Country Abbreviation Code Country Abbreviation Code Country Abbreviation Code Andorra 6877 Dominica 7573 Kiribati 6568 6569 United Arab Emirates 6879 Dominican Republic 7577 Comoros 6570 Afghanistan 6890 Algeria 7578 Saint Kitts and Nevis 6571 Antigua and Barbuda 6967...
Page 70 Abbreviation Code Country Abbreviation Code Country Abbreviation Code Country 8069 Peru 8374 Svalbard and Jan Mayen 8487 Taiwan, Province of China 8070 French Polynesia 8375 Slovakia 8490 Tanzania, United Republic of 8071 Papua New Guinea 8376 Sierra Leone 8565 Ukraine 8072 Philippines 8377...
Page 71: In Case Of Difficulty
This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is Disc properly connected, or then consult your authorised Alpine dealer. Disc playback sound is wavering. • Moisture condensation in the disc Module.
Page 72: If This Message Appears
The system will reset. • The mobile phone was not connected correctly. • An access error to DVD drive occurred for some reasons. - Check the settings for INE-W940E and the mobile phone and - The unit is rebooted automatically. reconnect.
Page 73 Playing back a DRM protected DivX File Some operations cannot be performed while displaying the following message. Authorization Error. This player is not authorised to play this video. ® • The version of the DRM protected DivX File is not supported by this unit.
Page 74: Specifications
PICKUP Specifications Wave length DVD: 666 nm CD: 785 nm MONITOR SECTION Laser power CLASS II Screen Size 6.1" LCD Type Transparent type TN LCD GPS SECTION Operation System TFT active matrix GPS Reception frequency 1575.42 ±1 MHz Number of Picture Elements 1,152,000 pcs. (800 × 3 × 480) GPS Reception sensitivity -130 dB max.
Page 75: End User License Agreement (Microsoft)
INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE terms are provided, then the terms of this EULA shall IN THE DEVICE, AND MS HAS RELIED UPON ALPINE TO apply, except that MS, Microsoft Corporation or affiliate CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE entity providing the Supplemental Component(s) shall be SOFTWARE IS SUITABLE FOR SUCH USE.
Page 76: End User License Agreement (Navteq)
Should you have any questions concerning this EULA, or if you for your personal use or, if applicable, for use in your business’ desire to contact ALPINE for any other reason, please refer to internal operations. This license does not include the right to the address provided in the documentation for the DEVICE.
Page 77 LIMITED WARRANTY GOVERNING LAW NAVTEQ warrants that, subject to the warnings set out below, for This Agreement shall be governed by the laws of the jurisdiction, a period of 12 months after acquisition of your copy of the in which you reside at the date of acquisition of the Database. Database, it will perform substantially in accordance with Should you at that moment reside outside the European Union or NAVTEQ’s Criteria for Accuracy and Completeness existing on...
Page 78: Installation And Connections
When connecting the INE-W940E to the fuse box, make installations or ground connections. Using such parts could disable sure the fuse for the intended circuit of the INE-W940E has the control of the vehicle and cause fire etc. appropriate amperage. Failure to do so may result in damage to KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE the unit and/or the vehicle.
Page 79: Installation
Mounting the Microphone. Installation For safe use, make sure of the following: • location is stable and firm. • driver’s view and operations are not obstructed. • microphone is located where the driver’s voice can be easily picked up (on the sun visor, etc.). Caution Do not block the unit’s fan or heat sink, thus preventing When you speak into the microphone, you should not have...
Page 80 Rubber Cap on the hex bolt. If your vehicle chassis. does not have the Mounting Support, reinforce the Attach the Original Mounting Bracket to each side of the INE-W940E, head unit with the metal mounting strap (not using the screws supplied with INE-W940E.
Page 81 • The diagram and the fuse amperage shown above are in the case when INE-W940E is used individually. • If the switched power (ignition) lead of the INE-W940E is connected directly to the positive (+) post of the vehicle’s battery, the INE-W940E draws some current (several hundred milliamperes) even when its switch is placed in the OFF position, and the battery may be discharged.
Page 82: Connections
Connections Antenna Microphone (Included) (Yellow) To Video Output terminal (Red) To Audio Output terminals (White) (R, L) Rear Left Amplifier Rear Right Front Left Amplifier Front Right Subwoofers Amplifier CAMERA To Camera with RCA Output (Yellow) terminal REMOTE OUT To remote input lead (Brown) To the instrument cluster ILLUMI...
Page 83 This lead may be connected to the vehicle’s instrument Left Front (–) Speaker Output Lead (White/Black) cluster illumination lead. This will allow the backlighting of the INE-W940E to dim whenever the vehicle’s lights are Right Front (–) Speaker Output Lead (Grey/Black) turned on.
Page 84: System Example
System Example Connection of a USB Memory or NOKIA Phone Nokia Phone (Sold separately) USB connector Nokia Phone connection kit KCU-230NK (Sold separatery) USB extension cable USB Memory (Sold separately) (Included) • Do not leave USB memory, in a vehicle for a long time. Heat and humidity may damage the USB memory. Connection of an iPod/iPhone USB connector iPod/iPhone...
Page 85 Connection of an External device AUX/PRE OUT Connector To Video Output terminal AUX/PRE OUT cable (Yellow) (Red) DVD Changer (Sold separately) (White) To Audio Output terminal REMOTE OUT REMOTE IN (Brown) (White/Brown) 1 Video/Audio Input Connectors (AUX INPUT) 3 Remote Control Output Lead (Brown) YELLOW is for input video, RED is right and WHITE is left Connect this lead to the remote control input lead.
Page 86 Connection of a Mobile Digital TV Receiver and DVD Changer To Video Output terminal DVD Player (sold separately) To Audio Output terminal DVE-5207, etc. iPod VIDEO input connector AUX/PRE OUT Connector AUX/PRE OUT cable To Video Output terminal To Video Input Terminal To Video Output terminal (Yellow) Mobile Digital...
Page 87 Connection of an External Amplifier Power Supply Connector AUX/PRE OUT Connector AUX/PRE OUT cable Amplifier 4 ch (Sold separately) (Red) (White) Input Front speaker (Red) Input Rear speaker (White) Amplifier for subwoofer (Sold separately) (Red) Input Subwoofer (White) REMOTE TURN-ON REMOTE ON (Blue/White) (Blue/White)
Page 88 Connection of camera AUX/PRE OUT Connector AUX/PRE OUT cable (Yellow) Camera with RCA video output (sold separately) HCE-C105, etc. 1 CAMERA Input RCA Connector (CAMERA) 2 RCA Extension Cable (sold separately)
Page 89: Navigation Section
NAVIGATION SECTION User Manual Alpine Navigation Navigation software for the Alpine INE-W940E English(EN)
Page 90 Thank you for choosing the Alpine INE-W940E as your navigator. Start using your device right away. This document is the detailed description of the navigation software. You can easily discover the software while you are using it; however, we still recommend that you read...
Page 91 Table of contents 1 Warnings and Safety information ................. 6 2 Getting started ......................7 2.1 Buttons and other controls on the screen ............... 8 2.1.1 Using keyboards ........................9 2.1.2 Beyond single screen tap ....................10 2.2 Map screen ........................11 2.2.1 Navigating on the map .......................
Page 92 3.1.5 Selecting the destination from your Address Book ............46 3.1.6 Selecting a recent destination from the History ..............47 3.1.7 Entering the coordinate of the destination ................. 48 3.1.8 Navigate to a location stored in a picture ................49 3.1.9 Building a route from the list of destinations (Create Route) ..........
Page 93 5.3.8 Trip monitor settings ......................81 5.4 Trip monitor ......................... 81 6 Glossary ........................82 7 Copyright note ....................... 84...
Page 94: Warnings And Safety Information
1 Warnings and Safety information The navigation system helps you find your way to your destination with a connected GPS receiver. The software does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate your software before you start your journey.
Page 95: Getting Started
2 Getting started When using the navigation software for the first time, an initial setup process starts automatically. Do as follows: Select the written language of the application interface. Later you can change it in Regional settings (page 80). Read the End User Licence Agreement. Tap to continue.
Page 96: Buttons And Other Controls On The Screen
The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 70). After the initial setup, the Map screen appears and you can start using the software. 2.1 Buttons and other controls on the screen When you are using the software, you usually tap buttons on the touch screen.
Page 97: Using Keyboards
Radio When there are only a few Tap one of the buttons to button choices, radio buttons may select a new value. be used instead of lists. Only one value can be selected. Switch When there are only two Tap it to turn the switch choices, a checkmark on or off.
Page 98: Beyond Single Screen Tap
Entering upper and lower When entering a text, the first character appears in upper case case letters while the rest of the text is in lower case. Tap to enter an upper case letter or tap twice to turn on Caps Lock. Tap again and lower case letters return.
Page 99: Map Screen
Gestures You need to drag and drop the screen only in cases like: (drag&drop) • Moving the handle on a slider. • Scrolling the list: grab the list anywhere and slide your finger up or down. Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end.
Page 100 The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). Default data fields when cruising without a destination (tap any of the fields to change its value): Field Description...
Page 101: Position Markers
2.2.2 Position markers 2.2.2.1 Vehimarker and Lock-on-Road When your GPS position is available, the software marks your current position with the Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings. When on-road navigation is selected, the Vehimarker may not show your exact GPS position and heading.
Page 102: Turn Preview And Next Street
2.2.3.2 Turn preview and Next street When navigating a route, the top section of the Map screen shows information about the next route event (manoeuvre) and the next street or the next city/town. There is a field in the top left corner that displays the next manoeuvre. Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current position are displayed.
Page 103: Lane Information And Signposts
Approaching the destination. These fields also act as buttons: • Tap the Turn preview field and the voice guidance will repeat the latest instruction with updated distance information. • Tap the Next street field to open the Itinerary. 2.2.3.3 Lane information and Signposts When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route.
Page 104: Motorway Exit Services
2.2.3.5 Motorway exit services You may need a petrol station or a restaurant during your journey. This feature displays a new button on the map when you are driving on motorways. Tap this button to open a panel with the details of the next few exits or service stations. Tap any of them to display it on the map and add it as a waypoint to your route if needed.
Page 105: Elements Of The Active Route
2.2.3.7 Elements of the active route Your software shows the route in the following way: Symbol Name Description Current GPS position and Your current position displayed on the map. If Start point roads are near, it is aligned to the nearest road. Normally if GPS position is available, the route starts from the current position.
Page 106: Manipulating The Map
In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to list the event in that category or select the top row to open the list of all traffic events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map:...
Page 107 Zooming in and out Changes how much of the map is displayed on the screen. Your software uses high-quality vector maps that let you examine the map at various zoom levels, always with optimised content. It always displays street names and other text with the same font size, never upside-down, and you only see the streets and objects that you need.
Page 108: Quick Menu
2.2.5 Quick menu The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be opened directly from the Map screen by tapping The menu will close after a few seconds of inactivity or if you tap Most of these functions are shortcuts.
Page 109 This button skips the next waypoint from the route. This button opens a 2D map scaled and positioned to show the entire route. This button opens the Visual Guidance settings screen. This button opens the list of traffic event types. This button lets you bypass parts of the recommended route.
Page 110: Checking The Details Of The Current Position (Where Am I?)
This button opens the parameters of the selected Vehicle profile. 2.2.6 Checking the details of the current position (Where Am I?) This screen contains information about the current position (or about the last known position if GPS reception is not available) and a button to search for useful Places nearby. You can access this screen from the map in one of the following ways: •...
Page 111: Navigation Menu
The following services can be searched around the current position or the last known position: • : Car repair and roadside assistance services • : Medical and emergency services • : Police stations • : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation menu You can reach all parts of the software from the Navigation menu.
Page 112 • to get information about your current position, the GPS reception or the trips you have taken or to run some additional applications.. • to customise the way the navigation software works. • Press the MAP hardware button to start navigating on the map.
Page 113: On-Road Navigation
3 On-road navigation When first started, Alpine INE-W940E calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
Page 114: Entering An Address
3.1.1.1 Entering an address To enter an address as the destination, do as follows: In the Navigation menu, tap the following buttons: By default, the software proposes the country and city/town where you are. If needed, , enter the first few letters of the country name on the keyboard, and select one country from the list of results.
Page 115 • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open list results before appears automatically, ). Select the street from the list. Enter the house number: Enter the house number on the keyboard.
Page 116: Entering The Midpoint Of A Street As The Destination
Tip! If you know that you will use this destination frequently, before tapping to confirm the destination, put it in the Address Book first: then , give a name for the new entry, and tap to save the location. The map with the destination returns automatically.
Page 117: Selecting An Intersection As The Destination
Instead of entering the house number, tap the input field above. The midpoint of the street is selected as the destination. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location.
Page 118 • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. Instead of entering the house number, tap .
Page 119: Selecting A City/Town Centre As The Destination
3.1.1.4 Selecting a city/town centre as the destination The city/town centre is not the geometric centre of the city/town but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of the important intersections.
Page 120: Entering An Address With A Postal Code
After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.1.5 Entering an address with a postal code All of the above address searching possibilities can be performed with entering the postal code instead of the city/town name.
Page 121 • The most likely street name is always shown in the input field. To accept it, tap • If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ).
Page 122: Tips On Entering Addresses Quickly
3.1.1.6 Tips on entering addresses quickly • When you are entering the name of a city/town or a street: • Only those letters are offered on the keyboard that appear in possible search results. All other characters are greyed out. •...
Page 123 • If you are in the Navigation menu, tap and then tap Using the keyboard, start entering the name of the Place. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. (optional) The Places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given).
Page 124: Searching For A Place Of Interest Using Preset Categories
3.1.2.2 Searching for a Place of Interest using preset categories The Preset search feature lets you quickly find the most frequently selected types of Places. In the Navigation menu, tap the following buttons: The preset search categories appear: • • If an active route exists, petrol stations are searched along the route.
Page 125 • If an active route exists, accommodation is searched around the destination of the route. • If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position.
Page 126: Searching For A Place Of Interest By Category
3.1.2.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. In the Navigation menu, tap the following buttons: Select the area around which the Place should be searched for: •...
Page 127 Select one of the Place subcategories (e.g. Hotel or Motel) or tap to list all Places in the selected main category around the selected location or along the route. Sometimes the list of brands in the selected Place subcategory appears. Select one brand or tap to list all Places in the selected subcategory around the selected location or along the route.
Page 128: Searching For A Place Of Interest By Name
12. If necessary, tap the map somewhere else to modify the destination. The Cursor ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 13. After a short summary of the route parameters, the map appears showing the entire route.
Page 129 (optional) If you have selected , select the city/town to search in. Select one of the main Place categories (e.g. Accommodation) to search in or tap to search among all Places. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category.
Page 130 After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 10. (optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour.
Page 131: Selecting Nearby Assistance From 'Where Am I
3.1.2.5 Selecting nearby assistance from 'Where Am I?' You can quickly search for nearby assistance from the 'Where Am I?' screen. On the Map screen, tap to open the Quick menu. , and then Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available): •...
Page 132: Using The Free Form Search
(optional) Tap to see the details of the selected Place. Tap to return to the map. If necessary, tap the map somewhere else to modify the destination. The Cursor ) appears at the new location. Tap to confirm the destination, or tap to select a different destination.
Page 133: Selecting A Map Location As The Destination
Select one of the items from the list. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination.
Page 134: Selecting The Destination From Your Address Book
After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.5 Selecting the destination from your Address Book You can select a location that you have already saved as an Address Book entry to be your destination.
Page 135: Selecting A Recent Destination From The History
After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.6 Selecting a recent destination from the History The destinations that you have set earlier appear in the History. Access the History: •...
Page 136: Entering The Coordinate Of The Destination
After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 3.1.7 Entering the coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: In the Navigation menu, tap Open the menu and tap...
Page 137: Navigate To A Location Stored In A Picture
location. Tap to confirm the destination, or tap to select a different destination. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey.
Page 138: Building A Route From The List Of Destinations (Create Route)
Note! Only geotagged JPG files contain location information. That is why these kind of files can only be used in navigation. Other picture files do not appear in the list. Files must be located on an inserted microSD card, in a "pictures" folder. 3.1.9 Building a route from the list of destinations (Create Route) You can also build your route destination by destination from the Route menu.
Page 139: Viewing The Entire Route On The Map
3.2 Viewing the entire route on the map It is easy to get a map overview of the active route. Do as follows: In the Navigation menu, tap . The active route is displayed in its full length on the map together with additional information and controls.
Page 140: Modifying The Route
• to bypass a part of the route. • to delete the active route. • to open a list with more options like changing route parameters, simulating the route, saving the active route or loading a previously saved route. • to return to the Navigation menu.
Page 141: Setting A New Starting Position For The Route
• to append the newly selected destination at the end of the route. The other destinations of the route remain intact. The previous final destination is now the last waypoint. 3.4.2 Setting a new starting position for the route For normal navigation, all routes are planned from the current position. In order to check future routes, simulate them or see their length in time and distance, you can turn off the GPS receiver.
Page 142: Editing The List Of Destinations (Edit Route)
When the new start point is set, tap The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. To return to normal navigation, tap 3.4.3 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations.
Page 143: Cancelling The Active Route
• to reorder the list. You can do it manually or you can let the application optimise the route for you. 3.4.4 Cancelling the active route To cancel the navigated route, do one of the following: • If you are on the Map screen, tap and then tap .
Page 144: Changing The Vehicle Used In Route Planning
Or if you cannot find a good alternative, tap and scroll down for routes with different routing methods. Select one of the route alternatives then tap to return to the Map screen. The software recalculates the route. The orange line now shows the new recommended route.
Page 145: Changing The Road Types Used In Route Planning
3.4.7 Changing the road types used in route planning To recalculate the active route with different road type preferences, do as follows. These changes can also be made in Settings. On the Map screen, tap and then tap Tap any of the listed road types to modify the route. If needed, scroll the list for all road types.
Page 146: Saving A Location As An Address Book Entry
3.5 Saving a location as an Address Book entry You can add any location to the Address Book, the list of frequently used destinations. Planning a route to one of these destinations was described earlier. Select a destination as described before. It can be an address, a Place, any location on the map, a previously used destination from History, a coordinate or a location where a photo was taken.
Page 147: Saving A Location As An Alert Point
3.6 Saving a location as an alert point You can save any map location as an alert point (for example a speed camera or a railway crossing). Browse the map and select a location. The red Cursor appears there. Scroll down the list and tap On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point.
Page 148: Editing An Alert Point
3.7 Editing an alert point You can edit a previously saved or uploaded alert point (for example a speed camera or a railway crossing). Browse the map and select the alert point to edit. The red circle appears around the alert point.
Page 149: Watching The Simulation Of The Route
3.8 Watching the simulation of the route You can run a simulated navigation that demonstrates the active route. Do as follows: In the Navigation menu, tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. (optional) You have the following controls during the simulation: •...
Page 150 to stop the simulation.
Page 151: Off-Road Navigation
4 Off-road navigation When first started, Alpine INE-W940E calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: •...
Page 152: Reference Guide
5 Reference Guide On the following pages you will find the description of the different concepts and menu screens of the software. 5.1 Concepts 5.1.1 Smart Zoom Smart Zoom provides much more than just a usual automatic zoom feature: • While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily recognise your manoeuvre at the next junction.
Page 153 • Roads are used only if access for cars is allowed. • Private roads and resident-only roads are used only if they are inevitable to reach the destination. • Walkways are excluded from routes. • • All manoeuvres are available in intersections. •...
Page 154: Green Routing
5.1.3 Green routing Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types, you can also check the fuel consumption and CO emission when planning a route, and you can create cost effective routes with less effect on the environment. In Route settings, you can edit the parameters of the selected vehicle.
Page 155: Traffic Information In Route Planning
You can also choose to see the speed limit sign on the map all the time. 5.1.5 Traffic information in route planning The recommended route is not always the same between two points. Offline statistical traffic information (historical speed information or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week whenever suitable data exists.
Page 156: Information Menu
to open the list of traffic even categories : In the first column you can see the number of traffic events on your route. The second column contains the full count of traffic events in the categories. Tap any of the even types to open the list of traffic events or tap the first line to show all events: Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map:...
Page 157 Button Description Tap this button to get information about the current location and to find nearby help. Tap this button to open the GPS Information screen with satellite position and signal strength information. If you save your trip logs when you arrive at some of your destinations or let the application automatically save the trip logs for you, those logs are all listed here.
Page 158: Settings Menu
Select a country from the list and see useful driving information about the selected country. Information may include speed limits on different road types, the maximum blood alcohol level and any compulsory equipment you need to show when stopped by the police. 5.3 Settings menu You can configure the program settings, and modify the behaviour of the software.
Page 159 For details, see page 7. Delete all saved data and reset all settings to their factory defaults. Visit alpine.naviextras.com to get additional content, such as new maps or 3D landmarks and useful applications. The About section provides you with product information. Read the Software and Database End User License Agreement, or check the map and other contents of the application.
Page 160: Sound And Warnings
5.3.1 Sound and Warnings Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button Description Tap this button to adjust the volume of the different sounds in the application.
Page 161 Maps may contain information about the speed limits of the road segments. The software is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. This setting lets you decide whether you wish to receive visible and/or audible warnings.
Page 162: Customise Quick Menu
5.3.2 Customise Quick menu The content of the Quick menu is fully customisable. Tap the button you want to change, and select its new function from the list. 5.3.3 Traffic settings The recommended route is not always the same between two points. Whenever suitable data exists, traffic information can be taken into account in the route calculation.
Page 163 The route calculation can be optimised for different situations and vehicle types by changing the planning method. See below for details. To let the route fit your needs, you can also set which road types are to be considered for or to be excluded from the route if possible.
Page 164 When creating a new vehicle profile, first you need to select the vehicle type. Then you need to set the following parameters. You can modify the same parameters when you edit an existing profile: Button Description Tap this button to rename the profile for something meaningful. Enter the average consumption of your vehicle when used in built-up areas.
Page 165: Map Settings
• Private roads, resident-only roads and walkways are excluded from routes. • • Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for taxis is allowed. • Private roads, resident-only roads and walkways are excluded from routes. Route Planning Method types: Button Description...
Page 166 Button Description Switch the map view between a 3D perspective view and two 2D top- down view modes. Adjust the basic zoom and tilt levels to your needs. Three preset levels are available. There is also a manual mode when you can set the zoom and tilt levels with the buttons on the left.
Page 167: Visual Guidance Settings
5.3.6 Visual guidance settings Adjust how the software helps you navigate with different kinds of route related information on the Map screen. The data fields in the corner of the Map screen can be customised. Tap this button and select the values you want to see. The values can be different when you navigate a route from when you are just cruising without a given destination.
Page 168: Regional Settings
Similar to the above possibility, alternative routes can be suggested when driving on normal roads. The software will select a different turn in the upcoming intersection and offers you a different route for the next section of the route. Your options are the similar as above but you cannot modify the offered detour.
Page 169: Trip Monitor Settings
5.3.8 Trip monitor settings Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor is available from the More menu. This is not a button.
Page 170: Glossary
6 Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
Page 171 Route A sequence of route events, i.e. manoeuvres (for example, turns and roundabouts) to reach the destination. The route contains one start point and one or more destinations. The start point is the current (or last known) position by default. If you need to see a future route, the start point can be replaced with any other given point.
Page 172: Copyright Note
This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Alpine Electronics, Inc. © 2013 - Alpine Electronics, Inc © 2013 NAVTEQ. All rights reserved.
Page 173 About the Rules of Bluetooth Electromagnetic Radiation Regulation Country Rules of Electromagnetic Radiation Regulation Thailand This telecommunication equipment conforms to NTC technical requirement.

Alpine INE-W940E Owner's Manual

Table of Contents

Operating Instructions

Precautions

Warning

Caution

Notice

Discs Playable on this Unit

Getting Started

Radio

CD/Mp3/Wma/Aac

DVD/Video CD

Setup

BLUETOOTH Operation

Auxiliary Device (Optional)

Camera Operation (Optional)

USB Memory (Optional)

Ipod/Iphone (Optional)

Installation and Connections

Warning

Caution

Precautions

Navigation Section

Table of Contents

1 Warnings and Safety Information

2 Getting Started

3 On-Road Navigation

4 Off-Road Navigation

5 Reference Guide

6 Glossary

7 Copyright Note

Quick Links

Chapters

Related Manuals for Alpine INE-W940E

Summary of Contents for Alpine INE-W940E