Table of Contents
Advertisement
Setting the AUX3
Connection with external input devices is available through the iPod
VIDEO connector. An optional adapter cable is required (standard RCA
to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable (4-
pole mini AV plug to 3-RCA).
Setting item: AUX3 In Sel.
Setting contents: iPod Video (Initial setting) / AUX3
iPod Video: Set when connected to an iPod or iPhone.
AUX3:
Set when connected to an external input device.
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
• Please check pin-out carefully before use of this product. Depending
on the cable, there may be no picture and/or sound.
Setting the AUX3 Sel. (Switching the Visual
Input Signal System)
After setting to "AUX3" in "Setting the AUX3 In Sel.," this setting can
be carried out. The video input type can be changed.
Setting item: AUX3 Signal
Setting contents: Auto (Initial setting) / NTSC / PAL
Auto:
The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL:
Choose the video input signal type manually.
42
-EN
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
BLUETOOTH Setup
BLUETOOTH Setup Operation
The parking brake must be engaged to access the Setup screen.
Attempting to access this screen while driving will display the
warning-Unable to operate while driving.
The following steps 1 to 5 are common operations to each
"Setting item" of BLUETOOTH Setup. Refer to each section for
details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch
(BLUETOOTH).
The BLUETOOTH Setup screen appears.
3
Select the desired item.
Setting items: BLUETOOTH / BLUETOOTH Info. / Set
BLUETOOTH Device / Auto Connect / Passcode
Change / Auto Answer / Auto Answer Time / Phone
Speaker / Caller Volume / Microphone Level / Ring
Tone Volume / Delete Call History
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
5
Touch [
] to return to the previous screen.
• Immediately after changing the BLUETOOTH Setup (while the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
BLUETOOTH Setting
[BLUETOOTH] is selected on the BLUETOOTH setup menu in step
3. Refer to "BLUETOOTH Setup Operation" (page 42).
Setting item: BLUETOOTH
Setting contents: Off / On (Initial setting)
Off:
BLUETOOTH function is not used.
On:
Select when you would like to pair your BLUETOOTH
compatible phone with this unit.
] to
Advertisement
Chapters
Table of Contents
