Getting Started - Acculab VICON Operating Instructions Manual

Getting Started

Equipment Supplied
– Balance/scale with in-use cover
– Weighing pan
– Plug-in AC adapter
Additional equipment with models VIC-612, VIC-412,
VIC-212, VIC-711, VIC-511:
– Calibration weight
Additional equipment with models VIC-303, VIC-123,
VIC-4MG, VIC-2MG:
– Calibration weight
– Round glass draft shield
– Level indicator and adjustable feet
Storage
$ Do not stack more than 3 balances on top of one another
at a time.
Installation
Choose a location that is not subject to the following nega-
tive influences:
– Heat (heater or direct sunlight)
– Drafts from open windows and doors
– Extreme vibrations during weighing
– Excessive moisture
Setting Up the Balance/Scale
§ Place the components on the balance/scale in the
following order:
– Reversible round weighing pan
– Round glass draft shield on models VIC-303, VIC-123,
VIC-4MG, VIC-2MG
3