Schedule - Trane TZEMT524AA21MA Installation Instructions And User Manual

USER GUIDE

Schedule

The 524 Control features a 7-day programmable schedule, and each day can 4 unique periods (Wake, Day, Eve and Night). Each day
of the week is set independently and the Copy Schedule function allows you to copy a schedule, once set, from one day to one or more
other days of the week.
Note: If the Schedule menu does not appear, be sure that Local Scheduling is enabled. This setting is accessed from the User Settings:
Thermostat: Local Schedule Enable.
Programming a Schedule for one day
13. From the Home Screen press MENU, then press NEXT until Schedule appears at the top of the screen.
14. Press SELECT, Edit Schedule appears at the top of the screen, press SELECT again.
15. Press NEXT or BACK until the desired day of the week is displayed. Press SELECT.
16. Using the up and down arrows, select the time of day for the Wake period to begin. Press NEXT.
17. Using the arrows, select the desired heating setpoint. Press NEXT. Now select the desired cooling setpoint and press NEXT.
18. Continue this process for the Day, Eve and Night periods, pressing NEXT each time after you have selected the desired values.
19. After you have selected the Night cooling setpoint, the display cycles back to the Wake time of day setting. To verify your selections,
press NEXT repeatedly to cycle through your selections, making changes as necessary. When you are satisfied with your schedule,
press DONE. You now see the Copy Schedule screen. Skip to step 3 below.
Copying a Schedule from one day to one or more days
1. From the Home Screen press MENU, then press NEXT until Schedule appears at the top of the screen.
2. Press NEXT or BACK until Copy Schedule appears at the top of the screen. Press SELECT.
Press NEXT or BACK until the desired day is displayed. This is the "from" day and will be a day for which you previously programmed
3.
a schedule.
4. Press SELECT.
Press YES to copy the schedule to this day, or NO to skip this day. Cycle through the days of the week until your selection is
5.
complete.
6. Press DONE to complete the copying process. Press DONE again to return to the User Settings menu.
Setting
Select Day
Set Time
Heat Setpoint
Cool Setpoint
When the start time, heat setpoint and cool setpoint values have been selected for all periods, pressing NEXT will return you to the Set
Time screen for the Wake period. Press Next repeatedly to review and modify your selections, or press DONE to finalize your schedule for
the selected day.
Setting
Copy From
Copy To
Edit Schedule from the Nexia web portal
Schedules can be easily updated from your Nexia™ Home Intelligence account. Simply go to www.MyNexia.com, log into your account
and select a TZEMT524 comfort control from the Climate Page. Click on Edit Schedule and follow the online instructions.
If you have not set up a Nexia
are required for remote access to the 524 Control. For questions about connecting, contact Nexia
at 877-288-7707
12
Menu Item: Edit Schedule
Range
Mon-Sun
12:00 am - 11:45 pm
55-90F
60-99F
Menu Item: Copy Schedule
Range
Mon-Sun
Mon-Sun
Home Intelligence account go to www.MyNexia.com and click on "Get Started". A router and Nexia Bridge
™
Select day of week to program
Select starting time of this period. The periods are Wake, Day, Eve and Night.
Pressing NEXT will accept the selected value and cycle through the Set Time,
Set Heat Setpoint and Set Cool Setpoint for each of the four periods.
Set the heat setpoint for this period
Set the cool setpoint for this period
Day to copy schedule from
Answer Yes to copy schedule to this day, answer No to skip this day
Description
Description
Home Intelligence Customer Service
™
18-HD46D1-1