User Settings - Trane TZEMT524AA21MA Installation Instructions And User Manual

USER GUIDE

User Settings

User Settings allow the user to customize various settings on the 524 Control. To access User Settings simply press Menu and SELECT.
Use the NEXT and BACK buttons to navigate through the options. Use the SELECT button to enter change mode. After making your
changes, use the DONE button to register your changes. The various options are shown in the following tables, and the default setting is
shown in brackets.
Setting
Temperature Scale
Fan Circulate On Time
Local Schedule Enable
Max Heat Setpoint
Min Cooling Setpoint
H/C Delta
When all selections have been made, press the Done button to register your changes and exit this menu item. Press Next to navigate to
the next menu item.
Setting
ESM Heat Setpoint
ESM Cooling Setpoint
When all selections have been made, press the Done button to register your changes and exit this menu item. Press Next or Back to
navigate to the next or previous menu item.
Setting
Screen Timeout
Backlight Timeout
Backlight On Percent
Backlight Off Percent
Buzzer Enable
Security
Guest Mode Range
When all selections have been made, press the Done button to register your changes and exit this menu item. Press Next or Back to
navigate to the next or previous menu item.
10
Menu Item: Thermostat
Range
[Fahrenheit], Celsius
10 - 55 minutes, [10]
[Yes], No
55 - [90] Degrees
[60] - 99 Degrees
[3] - 15 Degrees
Menu Item: Energy Save Mode
Range
55 - 90 degrees [62]
60 - 99 Degrees [85]
Range
[0] - 90 Seconds
0 - 90 Seconds [20]
0 - [100] Percent
[0] - 100 Percent
[Yes], No
[Unlocked], Display Lock, Guest
Access
[5 degrees], 1-5 degrees
Select the temperature display scale
Select the desired amount of time the fan will cycle per hour when the
Fan Mode selected is Circ
Select whether scheduling will be enabled or disabled. Note: Selecting
No will hide the Schedule menu.
Select the highest heating setpoint allowed
Select the lowest cooling setpoint allowed
Select the minimum distance between Heating and Cooling setpoints
Select the desired Heating Setpoint when ESM (Energy Savings Mode)
is selected
Select the desired Cooling Setpoint when ESM (Energy Savings Mode)
is selected
Menu Item: Display
Select how long after the last button press before the screen times out
Select how long after the last button press before the backlight dims
Select the screen brightness when the backlight is lit
Select the screen brightness when the backlight dims
Select whether button presses are audible
Select security level
• Unlocked - Enables selection of all menus and settings
• Display Lock - Disables selection of all menus and settings
• Guest Access - Disables selection of all menus and settings except the
following: Raise or lower heating or cooling setpoint +/- 5 degrees and
change system mode
Note: When Display Lock or Guest Lock is selected a lock icon will
appear next to the up arrow.
Note: To disable Display Lock or Guest Access, press and hold the up
and down arrows until the lock icon disappears.
How many degrees (+/-) Guests can change the preset Set Point
Description
Description
Description
18-HD46D1-1