Possibilities Of The Error Correction - piezosystem 12V40 Series Instruction Manual

8. Possibilities of the error correction

If the system does not work properly, please check the power cord first.
error
ON-LED is off
OVL or UVL-LED flash
The equipment is calibrated before delivery for the appropriate actuator
with integrated measuring system. An exchange of the actuator-amplifier-
combination leads to inaccuracies in setting movement and loss of
positioning accuracy. If the equipment is damaged during the use of
another actuator, no assurance can be undertaken!
The equipment concept makes adaptations to customer preferences concerning
the technical threshold values, such as the main voltage or the output voltage,
possible. Please contact our technical service department in order to discover
the possibilities for your specific problem.
Any adjustments necessary are to be paid for by the customer.
Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
30
possible correction
please check the power supply
over- or underload, please check the
modulation input and offset
table 4: possibilities of the error correction