Maintenance And Inspection; Environmental Condition - piezosystem 12V40 Series Instruction Manual

handled correctly! Please mount them properly, only at the special mounting
points.

Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal or may cause
electric shock, fire, or equipment failure.

Do not place heavy objects on any cables (e.g. power cords, sensor cables,
actuator cables, optical cables). Damage may cause malfunction, shock, or
fire!

Do not place the units on a sloping or unstable cart, stand, or table as they
may fall or not work accurately.
Immediately unplug your unit from the wall outlet and refer servicing to qualified
service personnel under the following conditions:

when the power supply cord or plug is damaged

if liquid has been spilled or objects have fallen into the unit

if the unit has been exposed to rain or water

if the unit has been dropped or the housing is damaged

5.1. Maintenance and inspection

CAUTION!

Before cleaning the exterior box of the voltage amplifier, turn off the power
switch and unplug the power plug. Failure to do so may result in a fire or
electrical shock.

Clean the exterior box using a damp cloth that has been firmly wrung-out.
Do not use alcohols, benzene, paint thinner, or other inflammable
substances. If flammable substances come into contact with an electrical
component inside the voltage amplifier, it may result in a fire or electrical
shock.

5.2. Environmental condition

The amplifier can be used:

indoors only

at an altitude up to 2000 m

at a temperature of 5 ... 35 °C

at a relative humidity of 5 ... 95% (non-condensing)
Tel: +49(0)3641/66880 • Fax +49(0)3641/668866 • • www.piezosystem.de
info@piezojena.com
23