How To Operate The 12V40; Technical Data - piezosystem 12V40 Series Instruction Manual

7. How to operate the 12V40

The 12V40 voltage amplifier series was especially developed for one channel
positioning tasks in optics, laser physics, microbiology, and machining. With an
output noise less than 0.3 mV, it is well suited for positioning in the sub-nm
range. It is also well suited for OEM applications.

7.1. Technical data

supply voltage
max. current
dimensions BxHxT [mm]
mass [g]
channels
output power [W]
output current [mA]
output voltage (OUT)
output connector (OUT)
modulation input (MOD)
inner resistance
monitor voltage (MON)
Inner resistance
output noise
bandwidth [Hz]
polarity
measuring system
measuring system connector
Tel: +49(0)3641/66880 • Fax +49(0)3641/668866 •
+12V DC (optional +24V DC)
1A @ 12V DC (0.5A @ 24V DC)
173mm x 130mm/105mm x 45mm
800
1
6
40
-10...+150 V
LEMO 0S.302
0...+10V SMB
10kΩ
-1...+15V SMB (0..+10V on SG / CLE)
0...+10V rear panel
100kΩ (SMB) / 10kΩ (rear panel)
<0,3 mV @ 500Hz
RMS
400
positiv
strain gauges (12V40SG)
external (12V40CLE)
LEMO 0S.304 (12V40SG)
ODU 4pin series L (12V40CLE)
table 1: technical data 12V40 series
• www.piezosystem.de
info@piezojena.com
25