MOTO GUZZI Le Mans 850 Additions And Changes To The Workshop Manual page 16

REAR SWINGING FORK
Overhauling
Inspect the rear swinging fork for abnormal ben-
ding or cracking at welded pOints and check the
smoothness of the connecting surface to the
rear drive box. For size inspection see Drwg.
311.
Removal at bearings
from the rear Iwlnglng tork
The cardan joint bearing is removed using pul-
ler 18927250 (66 in fig. 132) the rear swinging
'"
fork pin bearings are removed using puller
12904700 (14 in fi9 . 125).
AdJulUng the play of the rear .wlnglng fork
(fig.
313)
The rear swinging fork has to swing freely wi-
thout any play.
Pay attention that, for proper adjustment. the
pins must extend the same lenght.
For this adjustment use a screw driver .. A,. and
a gauge .B,..