Table of Contents
Advertisement
20
_____________________________ ___Appendix E Warranties and Notices
F.C.C. Certification
This device has been tested and found to comply with limits for Class A digital device,
pursuant to Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received; including
interference that may cause undesired operation.
CE Notice
The official CE symbol indicates compliance of this Kingston Technology
product to the EMC directive of the European Community. The CE symbol
indicates that this Kingston product meets or exceeds the following standards:
‰
EN50081-1 "Electromagnetic Compatibility-generic emissions standard"
EN55022:
‰
EN50082-1 "Electromagnetic Compatibility-generic immunity standard"
IEC 801-2: "Electrostatic discharge requirements"
IEC 801-3: "Radiated immunity requirements"
IEC 801-4: "Electrical fast transient requirements"
‰
EN60950
‰
Declaration of CE Conformity in accordance with the above standards has been
made and is on file at Kingston Technology.
C-Tick Certification
‰
AS/NZS 3548
‰
Declaration of C-Tick Conformity in accordance with the above standards has
been made and is on file at Kingston Technology.
Kingston Technology Company
"Limits and methods of measurement of radio
interference characteristics."
"Low Voltage Directive (LVD)"
"Information Technology Equipment"
N1298
KNS800/WG User's Guide - Rev. B01
Advertisement
Table of Contents
