Appendix C Specifications - Kingston Technology KNS500/WG User Manual

Fast etherx 5-port & 8-port 10/100tx workgroup fast ethernet switch
Table of Contents

Advertisement

Appendix C
Specifications
Fast EtheRx Model KNS800/WG
Compliance:
Media Interface:
Uplink Port:
10BASE-T /100BASE-TX:
Half / Full-duplex mode:
Diagnostic LEDs:
Switching Approach:
Flow Control:
Half Duplex:
Full Duplex:
MAC Address Support:
Filtering/Forwarding
Rate (min. packet size 64 byte):
Latency (min. packet size 64
byte)
Max Segment Length:
Connector Type:
Cable Type:
Cable Grade:
100BASE-TX:
10BASE-T:
Environmental:
Operating Temp.
Storage Temp.
Relative Humidity
Electrical:
Input Voltage:
Output Voltage:
Power Consumption:
Physical:
Dimension (HxWxD):
Weight:
Certification
EMI Standards:
EMC Standards:
Low Voltage Directive:
KNS800/WG User's Guide - Rev. B01
IEEE 802.3u 100BASE-TX Standard
IEEE802.3i 10BASE-T Standard
IEEE802.3 CSMA/CD Ethernet Standard
Eight (8) auto-negotiating 10/100 Mbps UTP ports
UTP port 8
Auto-Negotiation
Auto-Negotiation
1 LED for Power Indicator (steady green)
8 100BASE-TX speed detection LEDs(steady green)
8 Link LEDs (steady green) /Activity (flashing green)
8 LEDs for Full-Duplex (steady green) /Collision
(flashing amber)
Store-and-Forward
Collision-based Backpressure
IEEE 802.3x
Up to 1K MAC addresses
148,800 packets/second @ 100Mbps
14,880 packets/second @ 10Mbps
100Mbps to 100Mbps 8.8 s
10Mbps to 10Mbps 64.4 s
100 meters (328 feet)
RJ-45, Female
UTP 26 to 22 AWG
Category 5 or better
Category 3, 4, 5 or better
0°C to 45°C (32°F to 113°F)
-20°C to 60°C (-4°F to 140°F)
10% to 90% non-condensing
100VAC – 240VAC, 50/60Hz, external auto-sensing
power supply
5VDC/3A
9.8 Watts maximum
1.1" x 6.5" x 6.1" (28mm x 165mm x 155mm)
2 lbs. (0.9 kg)
FCC Class A, CE CISPR A, C-Tick
EN55022, IEC801-2, IEC801-3, IEC801-4
EN60950
Kingston Technology Company
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kns800/wg

Table of Contents