Netzspannung betreiben. Bei Fragen über die Art der Netzspannung Energieversorgungsunternehmen zu rate gezogen werden. RJ Nicht versuchen das Produkt selbst zu reparieren. In allen Produkten existieren gefährliche elektrische Spannugen. Nicht das Gehäuse öffnen. Kingston Technology Company sollte Fast EtheRx KNS1600/R - Rev. B00 Aufkleber bezeichneten Händler...
Front Panel ...5 Power LED...5 100BASE-TX (100TX) LED ...5 LINK/RX LED (for both 10 and 100Mbps) ...5 TX LED (Model KNS800/R Only)...6 Full Duplex and Collision LED ...6 UTP Ports ...6 KNS1600/R User’s Guide - Rev. B00 Kingston Technology Company...
Page 5
Duration of Warranty ... 19 Free Technical Support ... 20 Disclaimers ... 20 F.C.C. Certification ... 21 CE Notice ... 21 Kingston Technology Company Pin Assignments ... 10 Cabling Guidelines... 11 Specifications... 14 Frequently Asked Questions ... 16 Mounting Templates ... 18 Product Warranties and Notices ...
The Fast EtheRx Switch complies with IEEE802.3u 100BASE-TX, IEEE802.3i 10BASE-T, and IEEE802.3 CSMA/CD Ethernet Standards. The Fast EtheRx Switch may be used in both standard desktop and 19” rack- mount installations (using the mounting brackets provided with the unit) and requires no hardware or software configuration.
Be sure the items you receive are genuine Kingston Technology products. If the Kingston name and logo are not on the front panel of your unit, it is not a genuine Kingston product. KNS1600/R User’s Guide - Rev. B00 Kingston Technology Company...
Forward, which minimizes the re-transmission of faulty data packets. This means that the Fast EtheRx Switch can store the incoming frame in an internal buffer and check the packet for errors before sending it out to the destination port. If the frame does contain errors, it will be discarded and then retransmitted.
The PWR LED indicates the power status of the Fast EtheRx switch. The LED will light up steady green when the AC power cord is connected to the unit from a power source and the power switch on the unit has been turned on. 100BASE-TX (100TX) LED The 100TX LED will automatically light up when 100Mbps operation is detected.
Duplex mode is auto-negotiated on all UTP ports. UTP Ports Depending on the model, the Fast EtheRx Switch has eight (8) or sixteen (16) 10/100Mbps UTP ports that auto-negotiate 10/100BASE-TX connections and half- or full-duplex mode operation. The last UTP port has two RJ-45 port connectors for support of UTP cabling in the crossover or straight-through wiring configuration.
Page 12
MDI-X device. Use the MDI-X port when connecting to a hub or other MDI-X device. For any two devices to For connection to a NIC or router (MDI) Use straight-through cable Use cross-over cable Kingston Technology Company...
C o n f i g u r a t i o n Ta b l e Power Switch The AC Power switch turns the unit kj or kbb. If the PWR LED does not light up when the unit is turned on, please check the following: 1.
Both wiring schemes are mentioned in "Appendix B Cabling Guidelines" for reference in creating a twisted-pair cable. Fig. A-1 RJ-45 Connector Pin Numbers Pin Number Kingston Technology Company Pin Assignments MDI-X Receive Data + Receive Data -...
NEAR-END CROSSTALK (NEXT) – In wires packed together within a cable, the signals generated at one end of the link can flush out the weaker signals coming back from the recipient. KNS1600/R User’s Guide - Rev. B00 Kingston Technology Company...
9.3 Watts maximum 16.5 Watts maximum 1.69” x 17.32” x 7.88” (43.30mm x 443.40mm x 201.70mm) 5.7 lbs. (2.6 kg) 6.3 lbs. (2.9 kg) FCC Class A, CE CISPR A EN55022, IEC801-2, IEC801-3, IEC801-4 EN60950 UL, cUL, TUV Kingston Technology Company...
Ethernet packets. It repeats incoming signals to all other ports on the device. Like a repeater, a switch can also extend the diameter of a network. However, a switch can also extend the collision domain of a network, like bridging a 10Mbps Ethernet LAN with a 100Mbps Fast Ethernet LAN.
Page 22
Can a Four-Pair CAT 5 cable support two 100BASE-TX devices? Although only two pairs are used in the standard four-pair CAT 5 UTP cable, it is not recommended because it exceeds the specifications outlined by IEEE 802.3u. KNS1600/R User’s Guide - Rev. B00 Kingston Technology Company...
Appendix E Mounting Templates The Fast EtheRx Switch can be stationed on a flat surface using the four rubber feet provided, or mounted in a standard 19” rack by using the mounting brackets and 4 thumb screws provided with the unit.
Product Warranties and Notices Limited Warranty Statement KINGSTON TECHNOLOGY COMPANY ("Kingston") warrants that this product is free from defects in material and workmanship. Subject to the conditions and limitations set forth below, Kingston will, at its option, either repair or replace any part of this product which proves defective by reason of improper workmanship or materials.
CE Notice The official CE symbol indicates compliance of this Kingston Technology product to the EMC directive of the European Community. The CE symbol indicates that this Kingston product meets or exceeds the following standards: ‰...