Error Messages - Pioneer SPH-DA120 Operation Manual

Smartphone receiver
Hide thumbs Also See for SPH-DA120:
Table of Contents

Advertisement

Appendix
Problems with the Application screen
Symptom
A black screen is displayed.
The screen is displayed, but op-
eration does not work at all.
The smartphone was not
charged.

Error messages

When problems occur with this product, an error message appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
record the error message and contact your dealer or your nearest Pioneer service centre.
Common
Message
AMP Error
TEMP
Product overheat. System will
be shut down automatically
in 1 minute. Restart the pro-
duct by ACC-Off/On may fix
this problem. If this message
keeps showing up, it is possi-
ble that some problem oc-
cured in the product.
Positioning is not possible
due to the hardware. Please
contact your dealer or Pioneer
service center.
Cause
While operating an application, the
application was ended on the smart-
phone side.
The smartphone OS may be await-
ing screen operation.
An error has occurred.
Charging stopped because the tem-
perature of the smartphone rose
due to prolonged use of the smart-
phone during charging.
More battery power was consumed
than was gained from charging.
Cause
This product fails to operate or the
speaker connection is incorrect; the
protective circuit is activated.
The temperature of this product is
outside the normal operating range.
The temperature is too high for this
product to operate.
The location display is not possible
due to hardware failure.
Action
Touch the HOME button to display the Top
menu screen.
Stop the vehicle in a safe place and check the
screen on the smartphone.
! Park your vehicle in a safe place, and then
turn off the ignition switch (ACC OFF). Subse-
quently, turn the ignition switch to on (ACC
ON) again.
! When an Android device is connected, dis-
connect the Bluetooth connection from this
product and then reconnect it.
Disconnect the smartphone from the cable,
and wait until the smartphone cools down.
This problem may be resolved by stopping
any unnecessary services on the smartphone.
Action
Check the speaker connection. If the mes-
sage fails to disappear even after the engine
is switched off/on, contact your dealer or an
authorised Pioneer Service Station for assis-
tance.
Wait until this product returns to a tempera-
ture within the normal operating limits.
Follow the instructions displayed on the
screen. If this does not solve the problem,
contact your dealer or an authorised Pioneer
Station for assistance.
Contact your dealer or an authorised Pioneer
Station for assistance.
Appendix
111
Engb

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents