How To Use Your Remote Control - Bang & Olufsen BeoPlay V1–32 Manual

12
TV LIGHT RADIO
DTV DVD
V.MEM TEXT A.MEM
7 8
4 5
1 2
LIST 0 MENU
STOP
BACK
Important
– guides and FAQs are found on www.beoplay.com/v1/support
1 *Beo4 buttons
Digital Text/MHEG
MODE settings

How to use your remote control

TV
TV
DTV
TEXT
CD
0 – 9
LIST
9
MENU
6
3
PLAY
STOP
PLAY
BACK
Some buttons can be reconfigured during the setup process. See the online guide for more information.
NOTE! For general information about remote control operation, see the guide enclosed with your remote control.
Some countries and CA modules require activation of Digital Text/MHEG. If Digital Text/MHEG is activated, some
differences apply for Beo4. When no menu is shown on the screen, you must press MENU before a coloured button.
Check that your Beo4 remote control is in MODE 1. See page 19 on how to set up your Beo4.
Your television can be operated with a Beo4 remote control with
navigation button as described in this Getting Started and the online
guide, available on www.beoplay.com/v1/support.
The Beo4 display shows you the activated source or function
Switch on the TV*
1
Switch on, for example, a connected set-top box
Switch on teletext
Select channels and enter information in on-screen menus
Display extra "buttons" for functions or sources in the Beo4 display. Use
to step in the list
Bring up the main menu of the active source
Step through channels
Search backwards or forwards step by step
Hold to rewind or wind
Navigation button left, right, up and down , ,
pressing the button in the direction you need
Centre button is used for selecting and accepting
Select colour specific functions as indicated in menus
Adjust volume
To mute, press the middle of the button
Pause and stop playback
Start playback
Move backwards through menus and the Beo4 list. Long press to exit menus
completely
Standby
or
and . Move in menus by