T14Mz →T18Mz Model Data Conversion - FUTABA T18MZ FASSTest-2.4GHz Instruction Manual

T14MZ →T18MZ MODEL DATA CONVERSION
The model data (only latest version) of T14MZ can be copied to T18MZ.
* The card reader of a personal computer, SD card, and CF card is required.
* The model data of T18MZ cannot be copied to T14MZ.
Model data is copied to CF card.
The model data of SD card is used
by T18MZ.
[Model data conversion method]
1. The data which T14MZ wants to copy is put into
CF card.
2 . T h e c a r d r e a d e r o f o p t i o n m a r k e t i n g i s
connected to the personal computer of a
stock, and CF card is inserted in a card reader.
3. SD card is connected to the personal computer.
4.With the personal computer, the model data of
CF card is copied to SD card.
5.The SD card is inserted in T18MZ, and it copies to
T18MZ from SD card by the [Linkage menu] and [
Model select].
164
<Data>
SD
card
* When SD card cannot be recognized, it may be able to be used if it
reformats by SD formatter offered from SD Association.
SD formatter is downloadable from SD Association (https://www.
sdcard.org/).
(As of December, 2011)
Caution
After the completion of a data copy should fully
perform a check of operation on the model to be
used .
Check well all the directions of operation and all
the operation switches.
FUTABA CORPORATION
1080 Yabutsuka, Chosei-mura, Chosei-gun, Chiba-ken, 299-4395, Japan
Phone: +81 475 32 6982, Facsimile: +81 475 32 6983
C F c a r d i s c o n n e c t e d t o a
personal computer with a card
reader.
Card Reader
Model data is copied to SD card
as it is with a personal computer.
2011, 12 (1)