Selecting Tray Settings - Xerox Phaser 4500 Reference Manual

7.

Selecting Tray Settings

You can select trays by two different methods:
■
■
Using the Front Panel
To specify tray selection:
1.
2.
3.
4.
5.
Using CentreWare IS
To select a default tray:
1.
2.
3.
4.
5.
6.
7.
Tray Switching
Tray switching is the printer's ability to switch between trays that have the same paper type
and size when a tray runs out of paper.
Tray switching is controlled by the printer driver, front panel, or CentreWare IS.
PCL jobs always use tray switching, but PostScript jobs disable tray switching when a specific
tray has been selected as the paper source.
Downloaded From ManualsPrinter.com Manuals
Click Save Changes at the bottom of the screen.
The printer's front panel
CentreWare IS
At the printer's front panel, select
Select Paper Handling Setup, then press the OK button.
Paper Source, then press the OK button.
Select
Scroll to the desired tray or
Press the OK button to save the changes.
Note
The driver overrides the front panel settings and CentreWare IS for tray selection.
Launch your web browser.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
Select Properties.
Select the General folder on the left sidebar.
Select Printer Defaults.
Scroll to Print Mode Settings, then select the tray from the Paper Source drop-down list.
Click Save Changes at the bottom of the screen.
Printer Setup, then press the OK button.
Auto Select.
Phaser™ 4500 Laser Printer
1-16
Printer Settings