Xerox Phaser 4500 Reference Manual page 158

Error or Warning Messages (Continued)
Message
Tray {2/3/4] Paper Is Low
Out Of Paper; Load Tray [1/2/3/4] with
[size][type]
Wrong Paper Size; Load Tray [1/2/3/4]
with [size][type]
Paper Not Available; Load Tray [1/2/3/
4] with {size][type]
Standard Output Tray is Full. Unload
Paper.
Stacker Is Full. Unload Paper.
Toner Is Low.
Maintenace Kit Is Near End Of Life.
Replace Print Cartridge
Downloaded From ManualsPrinter.com Manuals
Description
The indicated tray is nearly emplty. Reload the same size
and type of paper soon.
Load the indicated paper size and type into the indicated
tray.
Replace the paper in the indicated tray with paper of the
indicated size and type.
Replace the paper in the indicated tray with paper of the
indicated size and type. Or select Print with Available
Paper to use a paper size and type currently in the printer.
Remove the paper from the indicated output tray.
Remove the paper from the indicated output tray.
The Print Cartridge is almost empty. Order replacement.
The Maintenance Kit (Fuser, Bias Transfer Roller, and feed
rollers) is near the enod of its life. Warning - when the
Fuser is replaced, use caution, some components inside
the rear cover may be hot. Order replacement.
1. Open the Top Cover.
2. Replace Print Cartridge.
3. Refer to the pictorial installation instructions on the
Print Cartridge itself.
4. Close the Top Cover.
Phaser™ 4500 Laser Printer
4-35
Front Panel Messages