SmartWatch® IP Network Camera User Manual
3. Click
5.6.6 Email Sending Triggered by Alarm
The system can be configured to send an Email notification to all addresses if an
alarm event is detected, e.g., motion detection event, video loss, tamper, etc.
Before you start:
Please configure the DNS Server settings under Basic Configuration > Network >
TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email
function.
Steps:
1. Enter the
TCP/IP Settings (
Configuration > Advanced Configuration > Network > TCP/IP) to set the IPv4
Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server.
Please refer to Section 5.3.1 Configuring TCP/IP Settings for detailed information.
2. Enter the Email Settings interface:
Configuration > Advanced Configuration > Events > Email
to save the settings.
Configuration > Basic Configuration > Network > TCP/IP or
Figure 5-36 Email Settings
51 51