Configuring Port Settings - Smartwatch IP Network Cameras User Manual

SmartWatch® IP Network Camera User Manual
2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address,
IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings and
Multicast Address.

The valid value range of MTU is 500 ~ 1500.

The Multicast sends a stream to the multicast group address and allows multiple clients
to acquire the stream at the same time by requesting a copy from the multicast group
address. Before utilizing this function, you have to enable the Multicast function of your
router.
3. Click
A reboot is required for the settings to take effect.

5.3.2 Configuring Port Settings

You can set the port No. of the camera, e.g. HTTP port, RTSP port and HTTPS port.
Figure 5-6 TCP/IP Settings
to save the above settings
.
26 26