Configuring Ddns Settings - Smartwatch IP Network Cameras User Manual

SmartWatch® IP Network Camera User Manual
2. Check the Enable PPPoE checkbox to enable this feature.
3. Enter User Name, Password, and Confirm password for PPPoE access.
The User Name and Password should be assigned by your ISP.
4. Click
A reboot is required for the settings to take effect.

5.3.4 Configuring DDNS Settings

If your camera is set to use PPPoE as its default network connection, you can use the
Dynamic DNS (DDNS) for network access.
Before you start:
Registration on the DDNS server is required before configuring the DDNS settings of
the camera.
Steps:
1. Enter the DDNS Settings interface:
Configuration > Advanced Configuration > Network > DDNS
2. Check the Enable DDNS checkbox to enable this feature.
3. Select DDNS Type. Three DDNS types are selectable: HiDDNS, IPServer and
DynDNS.
Figure 5-8 PPPoE Settings
to save and exit the interface.
Figure 5-9 DDNS Settings
28 28